Examples using expansion coefficients

Assignment Help Mechanical Engineering

Reference no: EM13709572

Using technical content provide some examples using expansion coefficients, use the following to produce 2 examples.

A. A copper pipe 5m long is raised in temperature from 373k to 1000°C. Calculate the expansion of the pipe?

B. What percentage increase in volume takes place in the contents of a kerosene tank when the temperature is raised from 4°C to 325k?

Reference no: EM13709572

Questions Cloud

Propane undergoes a throttling process : Propane vapor enters a valve at 1.0 MPa, 60°C, and leaves at 0.3 MPa. If the propane undergoes a throttling process, what is the temperature of the propane leaving the valve, in °C?

Calculate the specific removal rate and mrr of nickel : Calculate the specific removal rate and MRR (Volume of metal removed/sec) of Nickel in a certain electro chemical dissolution process, when a current of 500 A is being passed through the cell. Assume current efficiency = 100%.

Find fluids specific weight, density : A container holds .07m^3 of hydraulic fluid with a specific gravity of .9. find fluids specific weight, density, and weight.

Premature rate of failure on the road : A tire company has determined that its tires have a 1% premature rate of failure on the road. What is the chance that none of the 16 tires shipped to a retailer will have a premature failure?

Examples using expansion coefficients : Using technical content provide some examples using expansion coefficients, use the following to produce 2 examples. A copper pipe 5m long is raised in temperature from 373k to 1000°C. Calculate the expansion of the pipe? What percentage increase in ..

Circuit boards are manufactured on sheets and tested : Circuit boards are manufactured on sheets and tested. On average, there are 3 defects per sheet. What are the chances of 10 defects on a given sheet, no defects on a sheet, and more than 1 defect on a sheet?

Calculate the heat transfered to the air : Air is isothermally and reversibly compressed in a piston-cylinder device from an initial volume of 1.00 L and initial pressure of 100 kPa to a final volume of 0.100 L.

Determine the mechanical power required to drive compressor : Air enters the compressor of a turbofan engine at –20°C and 60 kPa, with a flow rate of 95 kg/s and speed of 170 m/s. At the compressor exit, pressure is 1830 kPa, temperature is 455°C, and speed is 134 m/s.

The internal energy of the piston-cylinder increases : 10 kJ of heat enters a piston-cylinder. The internal energy of the piston-cylinder increases by 2 kJ. How much work is produced by the piston-cylinder?

User Account

All Pages