User Account

All Pages

Evaluate the power that is dissipated by the load resistor

Assignment Help Electrical Engineering
Reference no: EM13261264

The parameters of a certain transmission line operating at ω = 6×108 rad/s are L = 0.35μH/m, C = 40 pF/m, G = 75 μS/m, and R = 17 Ω/m => α=0.0943 Np/m, β=2.2467 rad/m, λ=2.7966 m, Z0 =93.623-j3.6368

A 50-Ω load is attached to a 50-m section of the above mentioned transmission line, and a 100-W signal is fed to the input end of the line.

(a) Evaluate the distributed line loss in dB/m.

(b) Evaluate the reflection coefficient at the load.

(c) Evaluate the power that is dissipated by the load resistor.

(d) What power drop in dB does the dissipated power in the load represent when compared to the original input power?

(e) On partial reflection from the load, how much power returns to the input and what dB drop does this represent when compared to the original 100-W input power?

Reference no: EM13261264

Questions Cloud

Compute the first four energy levels of he+ : The energy levels of a Helium Ion, He+, may be calculated from the Bohr Theory using z = 2 for the atomic number, En = -1312.04 Z2/n2 or En=-5248.16/n2 (kJ mol-1) for n=1, 2,3,.... Calculate the first 4 energy levels of He+
Calculate the carrier diffusion coefficient at temperature t : (a) Assume that the mobility of a carrier at T = 300K is u = 925 cm^2/V-s. Calculate the carrier diffusion coefficient. (b) Assume that the diffusion coefficient of a carrier at T = 300 K is D = 28.3 cm^2/s. Calculate the carrier mobility.
Find the kinetic energy of the child-merry-go-round-system : A playground merry-go-round (uniform disk with mass M=150kg and radius R=2m) rotates on a frictionless axle through its center. What is the kinetic energy of the child-merry-go-round-system
Explain the most important kinds of intermolecular forces : What are the most important kinds of INTERmolecular forces present in each of the following substances
Evaluate the power that is dissipated by the load resistor : The parameters of a certain transmission line operating at ω = 6×108 rad/s are L = 0.35μH/m, C = 40 pF/m, G = 75 μS/m, and R = 17 Ω/m => α=0.0943 Np/m, β=2.2467 rad/m, λ=2.7966 m, Z0 =93.623-j3.6368
Compute the mass of given planet : Planet Z is 1.00×104km in diameter. The free-fall acceleration on Planet Z is 10.0m/s2. What is the mass of Planet Z
Find the probability of having neither type of defect : A law firm has thirteen senior and seven junior partners. A committee of 6 partners is selected at random to represent the firm at a conference. What is the probability that at least one of the junior partners is on the committee?
Find out the equilibrium constant for the reaction : Determine the equilibrium constant for the following reaction at 298 K. SO3(g) + H2O(g) ? H2SO4(l) ?G° = -90.5 kJ
What is her projected roi : Create a scenario, similar to Jasmine the Account Exec; recall it can be business or personal.

Reviews

Write a Review

Electrical Engineering Questions & Answers

  Draw the rom truth table for the seven segment

Draw the ROM truth table for the seven segment

  Does the sampling rate meet nyquist condition

A continuous time system, describes by y(t) = 5 Cos (2*pi*20*t+pi/2), is sampled at rate 320 Hz. a) Write the mathematical expression that describes the discrete time (sampled) signal. b) Calculate the value of the discrete signal for n=0 and n=4.

  Calculate the voltage drop across the bulb

An electrical energy source forces a constant current of 500(mA) through a light bulb for one hour. If 12.6(kJ) is given off in the form of light and heat energy, calculate the voltage drop across the bulb.Use Engineering Notation with 3 decimal p..

  What is value of the electric field perpendicular to surface

If an electric field in free space of 57.1 V/m makes an angle of 41 degrees to the surface normal of a dielectric slab with relative permittivity 4.01, what is the value of the electric field perpendicular to the surface just inside the slab

  Find the power crossing into a given transverse plane

a parallel plate transmission line is made up of perfect conductors of width w = .2m and d = .01m. The medium between the plates is a diaelectric of epsilon = 2.25*(epsilon not) and mu = mu not. For a uniform plane wave propagating down the line

  What types of the electrical connections in the circle

1.Name and characterize the main source working regimes and write down working regime conditions. 2.Write down the electrical source efficiency factor expression using the parameters of the source and consumer.

  Derive a state table for the fsm that produces z

During four consecutive clock pulses, a sequence of four values of the x signal is applied. Derive a state table for the FSM that produces z = 1 when it detects that either the sequence 1001 or 0111 has been applied; otherwise, z = 0. After the fo..

  Calculate the phase currents and the line currents

A three-phase, 400 V system has the following load connected in delta: between the red and yellow lines, a non-reactive resistor of 100; between the yellow and blue lines, a coil having a reactance of 60 and negligible resistance

  Determine voltage range that would be converted to pcm code

For a 12-bit linear PCM code with a resolution of 0.02 V, determine the voltage range that would be converted to the following PCM codes.  (a) 1 0 0 0 0 0 0 0 0 0 0 1 (b) 0 0 0 0 0 0 0 0 0 0 0 0 (c) 1 1 0 ..

  What is the locus of the center of the first circle

A circle touches the x axis and also touches another fixed circle with center (0,3) and radius = 2 units. What is the locus of the center of the (first) circle

  Convert the values to rev-min and mm-rev

A machinable grade of aluminum is to be milled on an NC machine with a 20 mm diameter four tooth end miling cutter, Cutting speed = 120 m/min and feed = 0.008 mm/tooth. Convert these values to rev/min and mm/rev.

  Determine the capacitance of a parallel-plate capacitor

determine the capacitance of a parallel-plate capacitor having plates 14cm by 30cm separated by 0.01mm. The dielectric has (epsilon)(r)=15

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

Submit Assignment

Academics

Major Subjects

Majors

Get In Touch

whatsapp: +1-415-670-9521

Phone: +1-415-670-9521

Email: [email protected]

TERMS & POLICIES

HELP & SUPPORT

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd