Evaluate the heat transfer per unit mass and work per unit

Assignment Help Civil Engineering
Reference no: EM13320434

A quality of water within a piston-cylinder assembly executes a Carnot power cycle. During isothermal expansion, the water is heated from saturated liquid at 50 bar until it is a saturated vapor. The vapor then expands adiabatically to a pressure of 5 bar while doing 364.31 kJ/kg of work.

a. Sketch the cycle on p-v coordinates.

b. Evaluate the heat transfer per unit mass and work per unit mass for each process in kJ/kg.

c. Evaluate the thermal efficiency.

Reference no: EM13320434

Questions Cloud

Estimate total cost and cost per linear foot for furnushing : estimate the total cost and cost per linear foot for furnushing and driving steel-sheet piling for construction of the basement of a building, 150 by 240 ft. the piles will be 22 in. wide, 18 ft. long, and weigh 40.3 Ib/Lin ft.
Which of the following should be deducted from net income : Which of the following should be deducted from net income in calculating net cash flow from operating activities using the indirect method? a. dividends declared and paid b. a loss on the sale of equipment c. depreciation expense d. gain on sale ..
The balanced chemical equation carbon dioxide and water : What is the balanced chemical equation for the complete combustion of benzoic acid, C6H5CO2H, to form carbon dioxide and water
What is the unit sales price : Jetson Co. sold 20,000 units of its only product and incurred a $50,000 loss (ignoring taxes) for the current year as shown here. During a planning session for year 2012 activities.
Evaluate the heat transfer per unit mass and work per unit : A quality of water within a piston-cylinder assembly executes a Carnot power cycle. During isothermal expansion, the water is heated from saturated liquid at 50 bar until it is a saturated vapor.
What is the average force on the nail : A nail gun fires a nail into a piece of wood. The nail is going a velocity of 6.8 m/s right before entering the wood. The mass of the nail is .06kg. what is the average force on the nail
Explain asian communication using facial expressions : Management Focus :Explain Asian communication using facial expressions and comment on the Western management misconceptions and deceptions by relying on such facial expressions. Comparative Management :Identify three possible pitfalls in dealing with..
Explain automates several operations : Jetson Co. sold 20,000 units of its only product and incurred a $50,000 loss (ignoring taxes) for the current year as shown here. During a planning session for year 2012 activities, the production manager notes that variable costs can be reduced 5..
Smoothing constant provides the better forecast : Compute three- and four- quarter moving averages for this time series. Which moving average provides the better forecast for the fourth quarter of 2006? Use smoothing constants of a=.4 and a=.5 to develop forecasts for the fourth quarter of 2006. Whi..

Reviews

Write a Review

Civil Engineering Questions & Answers

  Determine how many kilograms of sulfur would be emitted

coal has about 2% sulfur. How many kilograms of sulfur would be emitted from coal fired plints in the US in 1 yr US electricity production is about 0.28 * 10^12 watts, & coal has an energy content of about 30*10^6 J/kg

  Explain how to determine the power output of the turbine

The water enters at 1 atm at 10 C and the flow rate through the turbine is 40 m3/s. The water is discharged from the turbine 200 m below the intake at 1 atm and the temperature of the water at the discharge is 10.2 C.

  How much heat energy is radiatred from each of the disk

During frequent braking under race conditions the disk brake rotors on the car described above reach a temperature of 500C. These disk brakes rely on forced convection to cool them. The dimensions of each disk rotor are: outer radius 130mm

  Determine cunningham correction factor at standard condition

For a .15 micrometer diameter spherical particle (density of particle = 2500 kg/cubic meter) determine the Cunningham correction factor at standard conditions.

  Whate are the relative fractions of ferrite and cementite

A Fe-.25 w/o Carbon alloy is sloly cooled to 700 degrees C. What is the composition of the Ferrite(alfa) phase and what is the compositon of the cementite(Fe3C) phase. Whate are the relative fractions of ferrite and cementite

  What is the level of service of the upgrade segment

On this segment of freeway, the directional peak-hour volume is 3800 vehicles with 2% large trucks and 4% buses (no recreational vehicles), the peak-hour factor is 0.90, and all drivers are regular users.

  Determine the force in each member of the truss and state

Determine the force in each member of the truss and state if it is in tension or compression. Set P=400 lb and d=4 ft.

  How deep hole would be formed as a result of the excavation

The Metrodome's inflatable roof covers 10.0 acres and its interior volume is 60.0x103 cubic feet. During construction, 40.0x103cubic yards of concrete, 11.9x103 tons of reinforcing steel, and 5.00x102 tons of structural steel were utilized.

  By what percentage is the capacity of the flume reduced

determine the width of the flume to be used such that the depth of flow immediatly upstream of the throat under design conditions is 1 m. By what percentage is the capacity of the flume reduced if the downstream depth is 0.85m

  Determine both the point of tangent and deflection angles

The point of intersection of the tangents is located at station (948+67.32). If the design speed of the highway is 60mi/h, determine both the point of tangent and the deflection angles to whole stations for laying out the curve. Select appropriate..

  Determine maximum and minimum values of x displacement

a= -10 (1/sec^2 ) x where x is the displacement of the mass in meters. If the initial position is -1 m and the initial velocity is +1 m/sec, find: (i) the velocity when x = 0 for the first time and (ii) the maximum and minimum values of x.

  Design a suitable pavement consisting of a granular subbase

if the subgrade has a resilient modulus of 103,500kN/m2, design a suitable pavement consisting of a granular subbase with a layer of coefficient of 0.13, a granular base layer with a layer coefficient of 0.14, and an asphalt concrete surface with ..

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd