Evaluate the energy stored in the field

Reference no: EM13718250

Question: A 0.540 m long solenoid is formed by wrapping 790 turns of wire around a hollow cylinder with a radius of 0.270 m.

Part A: At the instant when the magnetic field in the interior is 0.890 T, calculate the energy stored in the field.

Show work or points will not be awarded.

Reference no: EM13718250

Questions Cloud

Determine through how many revolutions has it turned : A computer hard disk 8.0 cm in diameter is initially at rest. a small dot is painted on the edge of the disk. The disk accelerates at 620 rad/s2 for 1/2s, Through how many revolutions has it turned

Determine the initial temperature of the mixture : A piston-cylinder device contains 1.0 kg of liquid water and 0.01 kg of water vapor (steam) in equilibrium at 7 bars. The pressure is held constant and heat is added until the temperature reaches 280 C.

What is the total work done on the crate : A factory worker pushes a 30.6kg crate a distance of 4.8m along a level floor at constant velocity by pushing downward at an angle of 31 degrees below the horizontal. What is the total work done on the crate

Collar that slides along a smooth horizontal bar : A collar (A) that slides along a smooth horizontal bar. The mass of the collar is 14 kg, and the mass of block (B) is 18 kg. The spring constant for the spring connecting the collar to the frame is 700 N/m.

Evaluate the energy stored in the field : A 0.540 m long solenoid is formed by wrapping 790 turns of wire around a hollow cylinder with a radius of 0.270 m. calculate the energy stored in the field

What percentage of final current flows through an inductor : What percentage of the final current I0 flows through an inductor L in series with a resistor R, three time constants after the circuit is completed

Accelerometer is used to measure vibration of a motor mount : An accelerometer is used to measure vibration of a motor mount. The steady state vibration has amplitude of 10g at a frequency of 7.5 Hz.

Calculate the change in the stored energy : A current of 1.16 A in an inductor L results in a stored energy of 0.145 J. The current is then changed to 7.93 A in the opposite direction. Calculate the change in the stored energy

Volume of a cfstr to meet the same effluent standard : A reaction 2A--->B is second order with respect to A. Batch experiments have shown that, for an initial solution containing Ca=3mg/L, the concentration of A in a system can be reduced by 99% is 25 min.

User Account

All Pages