Evaluate ft for devices with l operated at overdrive voltage

Assignment Help Electrical Engineering
Reference no: EM13274903

Starting from the expression for the MOSFET unity-gain frequency, fT=gm/2*pi*(Cgs+Cgd) and making the approximation that Cgs>>Cgd and that the overlap component of Cgs is negligibly small, show that for an n-channel device fT=3*un*Vov/4*pi*L^2 Observe that for a given channel length, fT can be increased by operating the MOSFET at a higher overdrive voltage. Evaluate fT for devices with L=1.0 um operated at overdrive voltages of 0.25 V and 0.5 V. Use un=450 cm^2/Vs.

Reference no: EM13274903

Questions Cloud

Identify meanings of different lipid panel information : Identify the meanings of the different lipid panel information and determine appropriate levels. Provide relevant evidence for your opinions.
What is the aftertax salvage value of the asset : An asset used in a 4-year project falls in the 5-year MACRS class (MACRS Table) for tax purposes. The asset has an acquisition cost of $16,554,000 and will be sold for $3,738,000 at the end of the project.
How many different n-bit gray codes will be there : An n-bit Gray code is a way to encode numbers 0, 1, ..., 2n-1 in binary such that any two consecutive numbers (including 0 and 2n-1) differ in exactly one bit. For example, {00, 01, 11, 10} is a 2-bit Gray code, and {00, 10, 11, 01} is the only ot..
Explain what is the gauge pressure at a depth : What is the gauge pressure at a depth of 4.50 mi below the surface of the sea if thewater temperature averages 60°F? Give your answer in lb (force) per sq. in. The sp grof sea water at 60°F/60°F is 1.042 and is assumed to be independent of pressur..
Evaluate ft for devices with l operated at overdrive voltage : Starting from the expression for the MOSFET unity-gain frequency, fT=gm/2*pi*(Cgs+Cgd) and making the approximation that Cgs>>Cgd and that the overlap component of Cgs is negligibly small, show that for an n-channel device fT=3*un*Vov/4*pi*L^2
What is meant by an agency cost or agency problem : What is meant by an "agency cost" or "agency problem"?
Explain an unknown compound contains only oxygen : An unknown compound contains only carbon, hydrogen, and oxygen (C x H y O z). Combustion of 5.50g of this compound produced 8.07g of carbon dioxide and 3.30g of water.
Find the 3-db frequency of the cmrr of a mosfet : A MOSFET differential amplifier such as that is biased with a current source I=200uA. The transistors have W/L=25, k'n=200uA/V^2, VA=200 V, Cgs=40 fF, Cgd=5 fF, and Cdb=5 fF. The drain resistors are 20k-ohm each.
What will be the nominal value of the spy at your retirement : The stock symbol for the ETF is SPY. If the ETF appreciates at an average rate of 4% what will be the nominal value of the SPY at your retirement age?

Reviews

Write a Review

Electrical Engineering Questions & Answers

  What is the probability that a bulb purchased at random

Time to failure in months, X Fx(x) = (1 - e ^(-x/5))u(x) for plant A Fx(x) = (1 - e ^(-x/2))u(x) for plant B Plant B produces three times as much as plant A. What is the probability that a bulb purchased at random will burn at least

  Create a block diagram of the electronics

Create a block diagram of the electronics of the proposed vehicle. Include enough detail on each components and number of wires between each subsystem.

  Paper on orthogonal frequency-division multiplexing

This document is shown a paper on Orthogonal frequency-division multiplexing with advantages, disadvantages and uses.

  Calculate required resistor and capacitor values for circuit

Design an amplifier using a JFET and a 20V power supply. Calculate the required resistor and capacitor values for the circuit, assuming a minimum frequency of 10 Hz.

  Data and transfer rates and access time of disk drive

Capacity, Data and Transfer Rates, Access Time of Disk Drive, A hard disk drive has 10 disks and 18 surfaces available for recording. Each surface is composed of 200 concentric tracks and the disks rotate at 7200 r.p.m.

  Determine k when two real poles break away from real axis

A closed-loop system has a hold circuit and process as shown below. Determine G(z) when T = 1 and Gp(s) = 2 / (s + 2). A sampled-data system such as that presented in the above problem has a sampling period T = 0.05s

  Find what is the direction of the netforce on the loop

A filamentary current along thex axis has a current in the b a x direction. A square loop of current in the xy plane centeredat (0,10,0) has a current in the counter-clockwise direction. What is the direction of the netforce on the loop

  Determine the peak current during discharge

A person shuffling across a dry carpet can be approximately modeled as a charged 100-pF capacitance with one end grounded. If the person touches a grounded metallic object such as a water faucet, the capacitance is discharged

  Find power-factor capacitor that must be placed in parallel

The lighting and motor loads of a small factory establish a 10kVA power demand at 0.7 lagging power factor on a 208V, 60 Hz supply. Determine the power-factor capacitor that must be placed in parallel

  Calculate the noise specification given snr

3. For a simulated inductor application, to yield L = 75mH, R1 = 3kohm, and C1 = 200uF, determine required value of R2 4. For a constant current generator, with a saturation voltage = 20V and a current reference of 30mA, calculate RLmin.

  Calculate the resistance-inductance and capacitance

A series RLC circuit connected to a 100-V 60-Hz source draws a current of 2.5 A. The measured power factor for the circuit is 0.7 leading, and the inductive reactive power is 300VAr. Calculate the resistance, inductance and capacitance.

  Develop a sensor circuit using commodity components

ETEC 6414 Sensors and Wireless Communications, Assignment 1(a) –Sensor Circuit,  Develop a Sensor Circuit using commodity components

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd