Estimate what is the elongation of the rod

Assignment Help Physics
Reference no: EM13654980

One end of a steel (young's modulus of 2.0x10^11 M/m^2) rod of radius R=9.5mm and length L=81cm is held in a vice. A force of magnitude F=62000 N is then applied perpendicularly to the end face (uniformly across the area) at the other end. What is the elongation of the rod?

Reference no: EM13654980

Questions Cloud

Estimate how thick is the ice : A layer of ice has formed on a shallow pond. The air just above theice is at -5.21 °C, the water-ice interface is at 0 °C, how thick is the ice
The most promise and defend your position : Discussed in depth about four ways to improve performance ratings. Discuss in detail these four strategies. Identify the one that you think shows the most promise and defend your position.
What lengths of wire would you use : A certain type of radio antenna is called a quaterwavelength antenna, because its length is equal to one quarter of the wavelength to be received. what lengths of wire would you use
What frequency is the current amplitude the same : An inductor with L = 30 mH isconnected in parallel with a capacitor with C =85 µF. If they are connected to an AC voltagesource with f = 3.2 kHz, is the current larger in the inductor or in the capacitor? in the inductor in the capacitor
Estimate what is the elongation of the rod : One end of a steel (young's modulus of 2.0x10^11 M/m^2) rod of radius R=9.5mm and length L=81cm is held in a vice. What is the elongation of the rod
What is the frequency of there volution : A proton is accelerated through apotential difference of 1,000 V. After leaving the region of the electric field, the proton enters a magnetic field and is observedto be on a curved path of radius 5.0 cm. Assuming the magneticfield is perpendicula..
Obtain how much work do the students do on the car : Together, two students exert a force of 825N in pushing a car a distance of 35 m. How much work do the students do on the car
What net force is exerted on it : A race car has a mass of 706 kg. Itstarts from rest and travels 42.0 m in3.0 s. What net force is exerted on it
Find an important quotation from that act that supports : Find an important quotation from that act that supports your response. Explain clearly how this quotation supports your response to the prompt and what it reveals about this pair's relationship.

Reviews

Write a Review

Physics Questions & Answers

  Assuming the amplitude of the particle velocity

Light of wavelength 470 nm in air enters a fishbowl filled with water, then exits by the crown-glass wall of the container. Find the wavelengths of the light (a) in the water and (b) in the glass.

  What is the angle of this force on the ladder

A 73 kg window cleaner uses a 17 kg ladder that is 5.1 m long. He places one end on the ground 2.4 m from a wall, What is the angle of this force on the ladder

  What acceleration would aproton experience if guns electric

Beams of high-speed protons can be produced in "guns" usingelectric fields to accelerate theprotons. What acceleration would aproton experience if the gun's electric field were 2.23 x104 N/C?

  How much charge flows through the film

In an integrated circuit, the current density in a 2.9 ??m?thick× 71 ??m?wide gold film is 7.7×105A/m2, How much charge flows through the film in 15 min

  Acoil of wire is connected to an ideal 60-v battery at t

a coil of wire is connected to an ideal 6.0-v battery at t 0. at t 10.3 ms the current in the coil is 200 ma. one

  What is the value of the electric field for that wave

The value of the magnetic field for a certain type of electromagnetic wave is 2.12 ?T. What is the value of the electric field for that wave

  Obtain the initial total mechanical energy of the projectile

A 60.0-kg projectile is fired at an angle of 30.0° above the horizontal with an initial speed of 1.36 102 m/s from the top of a cliff 162 m above level ground, obtain the initial total mechanical energy of the projectile

  Determine and sketch all the external forces acting

Determine and sketch all the external forces acting on the chair. Because the chair can be represented as a point particle of mass , draw the forces with their tails centered on the black dot in the middle of the chair.

  Evaluate what is the fundamental frequency

A harmonic on a string1.3 m long has a frequency of 15.6 Hz. The next higher frequency is 23.4 Hz. Both ends ofthe string are fixed. What is the fundamental frequency

  Find the image distance and lateral magnification

An object is placed at a distance of 28 cm from a thin convex lens. The lens has a focal length of 9 cm. what are the values of the image distance and lateral magnification

  Calculate the magnitude of the uniform electric field

If the accelerating plates are 1.00cm apart, and have a potential difference of 2.55×104V , what is the magnitude of the uniform electric field between them

  At what minimum speed must a roller coaster

At what minimum speed must a roller coaster be traveling when upside down at the top of a circle (Fig. 5-34) if the passengers are not to fall out? Assume a radius of curvature of 9.4 m.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd