Estimate the wet density-dry density and buoyant density

Assignment Help Civil Engineering
Reference no: EM13308446

A sample of natural glacial till was taken from below the groundwater table. The water content was found to be 52%. Estimate the wet density, dry density, buoyant density, porosity, and void ratio. Clearly state any necessary assumptions.

Reference no: EM13308446

Questions Cloud

What is the speed of the wreckage : A 900 kg car travelling east at 15 m/s collides with 750 kg travelling north at 20 m/s. what is the speed of the wreckage
Calculate the wet unit weight in pounds per cubic feet : A gray silty clay (CL) is sampled from a depth of 12.5 feet. The "moist" soil was extruded ffrom a 6-inch high brass liner with an inside diameter of 2.83 inches and weighed 777 grams.
Find the least common multiple of the pairs of integer : Find the least common multiple (lcm) of the pairs of integers given in exercises.
Find the normal forces that the wall exert on the ladder : A uniform 210N ladder rests against a perfectly smooth wall, making a 40.0 degrees angle with the wall. Find the normal forces that the wall exert on the ladder
Estimate the wet density-dry density and buoyant density : A sample of natural glacial till was taken from below the groundwater table. The water content was found to be 52%. Estimate the wet density, dry density, buoyant density, porosity, and void ratio.
Build a sorted double-linked list such : For example, you build a list of characters, then you can print it out as: "a b c d e" or "e d c b a". The input is of an random character list is from the keyboard.
What is the water content of the material when saturated : The dry density of a compacted sand is 1.87 Mg/m^3 and the density of the solids is 2.67 Mg/m^3. What is the water content of the material when saturated. Include a phase diagram.
Effects on inflation and real gdp that these policies will : Assume the economy initially is in a long run equilibrium plus the following:  the U.S. dollar is relatively strong against all major foreign currencies.  Suppose the Congress and the President decide to decrease government spending dramatically
Calculate each student average and grade for the class : Also print a report of the each student's test grades, average and final grade as a table, and then print the averages of each Test and overall Test Average, as well as highest Test Grade of all Tests and the student with the highest class grade.

Reviews

Write a Review

Civil Engineering Questions & Answers

  Determine how much pressure is developed in the system

A multiple-piston hydraulic jack has two output pistons, each with an area of 250 cm^2. The input piston, whose area is 25 cm^2, is concerned to a lever that has a mechanical advantage of 9:1.

  Find what is the maximum you would pay for the bond

A 10-year $2000 Bond with a coupon rate of 10% paid semi-annually is available for purchase. What is the maximum you would pay for this bond if your MARR (without inflation) is 6%, and you estimate an inflation rate of 3% annually

  Determne the diameter of the tube at a uniform rate

A 25 mm diameter steel cylinder falls under its own weight at a uniform rate of 0.1 m/s inside a tube of slightly larger diameter. Castor oil of viscosity 0.25 N.s/m2 fills the spacing between the tube and the cylinder.

  What are the position and acceleration of body as functions

The velocity of a body is given by v(t) = 2t+t3. The body starts from rest at time t = 0 at position s(0) = (2,-10). What are the position and acceleration of the body as functions of time At what time, t, does the body cross the X-axis

  Determine the force to overcome static friction with table

A 15kg Block rests on top of a 25kg Block which is subject to a 400N force. Block B sits on a table. the Coeffiecents of friction are the same for all surfaces, u(s) is .4 and U(k) is .3. The force is Applied to the bottom block ( with no inclinat..

  Determine the final maxture dry bulb temperature

one atmospheric air stream at 15 c and 30 percent relative humidity is mixednadiabatically with another air stream at 30c and 70 percent relative humidity in a steady flow process

  Determine the depth of flow at the transition at a depth

A 1.6-m wide rectangular channel carries 1.8 m3/s at a depth of 0.85 m. The channel undergoes a smooth transition in which the channel bottom rises 15 cm and contracts to a width of 1.3 m. Assuming friction losses are negligible, determine the dep..

  Determine the weight of the satellite in pounds

A satellite would have a mass of 200 kg on the surface of the moon. Determine the weight of the satellite in pounds when it is in orbit 10,000 mi. above the surface of the earth.

  What bolt sizes must be used for the allowable shear stress

A structural steel beam is attached to a column with bolts. The downward force on the connection is 150 kips. What bolt sizes must be used if the allowable shear stress is 25.0 ksi

  What is the hydrologic risk of occurring in the next 10years

Lake levels have been measured for the past 50 years at Cagles Mill Lake. The highest annual lake levels (in feet, mean sea level) on record are 887.5, 887.3, 886.5, 886.0, 885.9. The other 45 annual peaks are smaller.

  Calculate the air flow required in cfm to transfer

Calculate the Air flow required in CFM to transfer 5,396 BTU/Hour in an HVAC duct given that the temperature difference (Delta-T) between the room and the supply air is 21 DegF.

  What is the equivalency factor for the 14 kip single axle

What is the equivalency factor for the 14 kip single axle?

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd