Estimate the tension in the rope

Reference no: EM13318729

Consider a beam as shown in the figure that is 2 m long and supported by a rope. It is pressed against the wall. There is no friction between the wall and the beam. If the beam has a mass of 2 kg and a sign with a mass of 10 kg is hung off of the end of the beam, can the system be in static equilibrium? If so, what is the tension in the rope?

Reference no: EM13318729

Questions Cloud

Determine what is the displacement from t : Suppose that the acceleration of the train during the interval time from t=2 to t=4 s is a 2t m/s^2, and at t = 2 s its velocity is v = 180 km/hr. What is the train's velocity at t = 4 s

What is the impedance of the circuit at resonance : A series RLC circuit has R = 75 %u03A9, L= 20 mH, and a resonance frequency of 4.0 kHz. What is the impedance of the circuit at resonance

Design speed station of pc station of pt deflection angle : A horizontal Curve is designed for a two lane mountainous terrain. The following data are known. intersection angle: 40 degrees tangent length: 436.76 ft Station on PI: 2700+10.65 fs=0.12 e=0.08

Determine the work in kj in a friction-less piston-cylinder : Nitrogen expands in a friction-less piston-cylinder device from 0.10 to 0.30 m^3. The process is described by P= 7.4 - 40v + 60v^2 , where P is in bars and V is in cubic meters. Determine the work in kJ.

Estimate the tension in the rope : Consider a beam as shown in the figure that is 2 m long and supported by a rope. It is pressed against the wall. what is the tension in the rope

Determine volume of three identical activated sludge tanks : Determine the volume of three identical activated sludge tanks following primary clarification to aerate 36,000 m cubed/d with a BOD concentration of 180 mg/l at a BOD loading of 560 g/m cubed*d.

Calculate the resistance of the lamp : A 0.75 H inductor is in series with a fluorescent lamp, and the series combination is across the 120 V rms, 60 Hz power line. Calculate the resistance of the lamp

Determine the activated sludge aeration volume required : Determine the activated sludge aeration volume required to treat 2.64 mgd with a BOD of 120 mg/l based on the criteria of a maximum BOD loading of 40 lb/1000 ft cubed/day and a minimum aeration period of 5 hr.

Calculate the surface area required for a stabilization pond : Calculate the surface area required for a stabilization pond to serve a domestic population of 1000. Assume 80 gpcd at 210 mg/l of BOD. Use a design loading of 20 lb of BOD/acre/day.

User Account

All Pages