Estimate the temperature of the gas when it emerges

Assignment Help Chemical Engineering
Reference no: EM131155878

Problem 9.7: A reservoir contains natural gas at a pressure of 5000 psig and a temperature of 180 °F. The composition of the gas is 80% methane, 15% ethane, and 5% CO2 (all fractions are by mole). Estimate the temperature of the gas when it emerges at the surface under the following alternative assumptions:

a) The flow to the surface is assumed to be reversible adiabatic expansion.

b) The flow to the surface is assumed to be a throttling process.

Take the natural gas to be an ideal-gas mixture with temperature-dependent heat capacities for each component given in Perry's Handbook. Is the ideal-gas assumption reasonable?

Reference no: EM131155878

Questions Cloud

Is the ideal-gas assumption reasonable : Take the natural gas to be an ideal-gas mixture with temperature-dependent heat capacities for each component given in Perry's Handbook. Is the ideal-gas assumption reasonable?
Minimum automobile insurance liability : Determine the minimum automobile insurance liability limits for your state. How do these minimums compare with those in other states? How well insured do you feel someone would be if they carried only the legal liability limits.
Complete the following work sheet : Complete the following work sheet that is Attached. - Description of data for the month of May 2016 -Balance: Account ending balance in dollars as of May 31, 2016.
How can the corpus delecti of robbery be demonstrated : How can the corpus delecti of robbery be demonstrated? Of theft? Why did the court conclude that, "In this case, the evidence does not conclusively establish that Hoke's purse was taken forcibly from her. The evidence does, however, support an inf..
Estimate the temperature of the gas when it emerges : A reservoir contains natural gas at a pressure of 5000 psig and a temperature of 180 °F. The composition of the gas is 80% methane, 15% ethane, and 5% CO2 (all fractions are by mole).
Create a facility emergency plan : Pine Hills Medical Center has made the decision to create a facility emergency plan. Management is considering three options to pursue this decision: (1) HAVE THE hospital's safety officer write the plan, (2) form a planning committee to develop t..
Describe the methods for collecting and storing dna evidence : Explain why extra caution must be exercised when collecting DNA analyzable evidence. Discuss the precautions that must be followed to avoid contamination of evidence that may contain DNA evidence.
First-level management position : Explain the need to develop three new positions including one first-level management position. Include a needs analysis, diversity issues, job analysis, job descriptions and qualifications for the three positions,
Calculate the amount of heat removed : Additional data: Assume for simplicity that the ideal-gas heat capacities are constant: n-hexane = 176 J/mol K; n-octane = 247 J/mol K.

Reviews

Write a Review

Chemical Engineering Questions & Answers

  Depth intuitive walk through of problem

A problem similar to it will be on the exam. He kind of went over it, but the whole class was struggling a more in depth/intuitive walkthrough of this problem.

  Write 4 methods of measuring temperature & fluid pressure

CHE 352 – Spring 2014, In this assignment, students will review some of the concepts of measurements discussed, 4 methods of measuring temperature, 4 methods of measuring fluid pressure

  Find the induced emf across the coil

Calculate the average mechanical torque needed to turn the coil and generate power for the resistor. Identify the action of the device as that of a motor or a generator.

  Order kinetics with a constant density

The volume of each stirred tank is 40,000 liters. In passingthrough this system, by how much has the activity decayed? The reaction follows first order kinetics with a constant density

  Draw the corresponding current variation with time

A charge variation with time is given in Figure P1.1.8. Draw the corresponding current variation with time.

  Devise a control system for reactor

Devise a control system for this reactor, and draw up a preliminary piping and instrument diagram. The following points need to be considered:

  How many years of useful life should be estimated

How many years of useful life should be estimated for the reactor if 12 percent of the total annual expenses for the plant are due to the cost for reactor depreciation? The straight-line method for determining depreciation should be used.

  Maximize the selectivity for product

The following sequences of reactions are to occur in a constant density reactor. Which type of continues flow-reactor would be best to maximize the selectivity for product C?

  Materials of construction for the tanks

Plain carbon steel would be a suitable material for the tanks, but it is essential that the polymer does not become contaminated with iron in storage. Suggest some alternative materials of construction for the tanks.

  Design a horizontal shell and tube condenser capable

Take the saturation temperature of n-propanol at 2.1 bar as 118oC. The otherphysical properties required can be found in the literature, or estimated.

  Determine the reactive power of the motor

A three-phase, wye-connected, cylindrical-rotor, synchronous motor, with negligible armature resistance and a synchronous reactance of 1.27 Ω per phase, is connected in parallel with a three phase, wye-connected load taking 50 A at 0.707 lagging p..

  Calculate the maximum allowable particle size as a function

Calculate the maximum allowable particle size as a function of the bulk glucose concentrations of 5 g/ l and 50 g /l. For medium containing 30 g /l glucose, calculate Rmax at cell loading of 5 and 30 wt%.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd