User Account

All Pages

Estimate the required surface area and the diameter

Assignment Help Civil Engineering
Reference no: EM132416587

A drinking water treatment plant will be designed to process a flow of 15,000 m3/d. The sedimentation tank will have a residence (detention) time of 4 hours and the overflow rate (Q/A) of 16 m3/m2-day. Estimate the required surface area (A), and the diameter and the depth of the tank.

Reference no: EM132416587

Questions Cloud

Discuss the impact that alternative programs has had : As part of your response discuss the impact that alternative programs has had on the administration of correctional agencies from the perspective of both.
What is the level of the service of compound-grade freeway : If the peak-hour factor is .90 and all of the drivers are regular users, what is the level of the service of this compound-grade freeway segment?
How could the issue have been avoided : Imagine you are a Security Executive overseeing a Security Project Manager. The Project Manager is working on a new CCTV camera installation at a University.
Suspended solids concentration of raw river : Presedimentation can reduce the suspended solids concentration of raw river water from 500 mg/L to 200 mg/L. How many pounds of dry solids does this represent
Estimate the required surface area and the diameter : Estimate the required surface area (A), and the diameter and the depth of the tank.
Voc emissions from the mobile sources : Assume that there were 1,100,000 vehicles making a 28.5-mi round trip per day, the average vehicle emission rate for VOCs is 1.3 g/VM
Examine the role of court administrators : Compose an essay of 650 - 750 words that examines the role of court administrators with ensuring that the appropriate punishment is imposed when sentencing.
Particle emissions from the station : Estimate the hourly SO2 and particle emissions from the station. What type of particle collector would you use at the station?
Creating a proposal of the juvenile justice system : You are a juvenile justice consultant creating a proposal that will be presented to the state legislature concerning the future of the juvenile justice system.

Reviews

Write a Review

Civil Engineering Questions & Answers

  Determine the factor of safety

The soil at a site is shown in Figure P16.12. A slope will be cut to facilitate the construction of a roadway. One possible failure surface is shown in Figure P16.12. Determine the factor of safety. The shear strength parameters were obtained from..

  What position in futures contracts should it take

Suppose that the company changes its mind and decides to increase the beta of the portfolio from 1.2 to 1.5. What position in futures contracts should it take?

  Find the specific compressor work and the exit temperature

A water-cooled air compressor takes air in at 20?C, 90 kPa and compresses it to 500 kPa. The isothermal efficiency is 88% and the actual compressor has the same heat transfer as the ideal one. Find the specific compressor work and the exit tempera..

  Write assembly-language program that counts all even numbers

Write a HCS12 assembly-language program that counts all even numbers from a 10-variable, byte-sized array and moves the odd numbers to a new array.

  What was the rovers weight when it was at sea level on earth

When the Mars Exploration Rover was fully assembled, its mass was 180 kg. The acceleration due to gravity at the surface of Mars is 3.68 m/s2. a) What was the rover’s weight when it was at sea level on Earth? b) What is the rover’s weight on the surf..

  Determine the change in kinetic energy and the power output

Steam flows steadily through an adiabatic turbine. Theinlet conditions are 10 MPa, 450 C and 80 m/s. and the exitconditions are 10 kPa, 92% quality at 50 m/s.

  Forces and stress in each member

Determine the forces and stress in each member by using method of joints?

  Determine the horizontal force p that must be applied

The wedge is used to level the member. Determine thehorizontal force P that must be applied to move the wedge to theright. The coefficient of static friction between the wedgeand the two surfaces of contact is

  Determine expected rate of return per quarter and per year

ASM International, an Australian steel company, claims that a savings of 40% of the cost of stainless steel threaded bar can be achieved by replacing machined threads with precision weld depositions

  What must ph be raised to in order to precipitate of iron

Groundwater in Taupe, Arizona, initially contains 1.8 mg/L of iron(III). What must the pH be raised to in order to precipitate 0.3 mg/L of the iron

  Determining the crest and sag vertical curves

Determine, for the crest and sag vertical curves required, the stationing and elevation of the PVCs and PVTs given that the PVC of the crest curve(on westernmost level highway section) is at station 0+00 and elevation 100 ft.

  Find the shortest ladder

a wall 8 ft high is 3/3/8 ft. from a house. find the shortest ladder which will reach from the ground house when leaning to the wall.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

Submit Assignment

Academics

Major Subjects

Majors

Get In Touch

whatsapp: +1-415-670-9521

Phone: +1-415-670-9521

Email: [email protected]

TERMS & POLICIES

HELP & SUPPORT

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd