Estimate the required stack height for wind speeds of 4

Reference no: EM13542348

A plant is to be constructed that will emit 3.5 metric tons of hydrogen sulfide per day. One of the design criteria is that the concentration 1 km downwind from the stack must not exceed 120 micrograms/m3. Initial plume rise is neglected. Estimate the required stack height for wind speeds of 4 m/s and 8 m/s.

Reference no: EM13542348

Questions Cloud

Determine the normal depth and critical depth in a trapezoid : Determine the normal depth and critical depth in a trapezoidal channel with a bottom width of 12.5 m, side slopes of 2:1, and a bed slope of 0.003 m/m.

Calculate the depth of water at each end of the tank : A rectangular tank 2.0m wide, 4m long, and 2m deep contains water to a depth of 1.0m It is accelerated horizontally at 3m/s^2 in the x direction.

Water is transferred at a rate of 2.1cfs from reservior : Water is transferred at a rate of 2.1cfs from an upper reservoir to a lower reservoir by a concrete pipe 3000ft long. The difference in water level is 60ft. Determine the size of pipe for a water temperature of 60 degrees Fahrenheit. Apply The Darcy-..

At what depth of flow does the vehicle begin to move : You are in charge of evaluating the safety (hazard) of a low water crossing. Traffic surveys show that the "Aaverage"vehicle using the crossing is semi-rectangular in shape (10 ft long, 5 ft wide, and 4.0 ft high - not including the distance from the..

Estimate the required stack height for wind speeds of 4 : A plant is to be constructed that will emit 3.5 metric tons of hydrogen sulfide per day. One of the design criteria is that the concentration 1 km downwind from the stack

Find the diameter of the tube to accomplish this : It is desired to transmit 300mm^3/s of gasoline at 20 degree Celsius through a 650mm long horizontal tube with a head loss of 500mm Find the diameter of the tube to accomplish this.

Find how many dimensionless parameters govern this problem : The flowrate Q over a rectangular sharp crested weir depends on the width of the notch b, the head on the weir H, and the acceleration due to gravity g.

Plot a curve showing the relationship of se versus : Plot a curve showing the relationship of Se versus L/r for steel columns. Draw the curve for slenderness ratios that vary from 0 to 200. Assume the proportional limit = 235 MPa

Water is critical to the paper production process : Fresh water enters the process in 3 streams – approx. 0.5 ML/d enters with chemicals at the dry end of the machine, approx. 1 ML/d enters at the wet end of the machine and the boiler consumes approx. 0.2 ML/d.

User Account

All Pages