Estimate the optimum diameter per foot of packed height

Assignment Help Chemical Engineering
Reference no: EM131061364

A random-packed tower is to be used for contacting 3000 lb/h of air with 4000 lb/h of water. The tower will be packed with l-in. chemical porcelain Raschig rings. The operating pressure is 1 atm, and the temperature is 70°F. Assuming column operation is in the preloading range, estimate the optimum diameter per foot of packed height to give minimum annual cost for fixed charges and blower operating charges. The following additional data apply:

Annual fixed charges = 0.2 times cost of installed unit

Cost of installed unit, complete with distributor plates, supports, and all auxiliaries = 2.0 times purchased cost of shell and packing

Cost of delivered power = $0.08/kWh

Operating time = 8000 h/year

Purchased cost of shell = $40/ft3 of packed volume

Purchased cost of packing = $22.00/ft3

Reference no: EM131061364

Questions Cloud

Determine the top five threats in a risk register : Analyze assumptions and constraints to generate further risks Standard risk checklist to identify any further/final risks
Estimate the gas rate as pounds per hour : A larger distillation tower is needed for the same mixture, and it has been decided to use a 12-in. inside-diameter tower with the same type and size of packing.
What are the risks of revealing mistakes in an open culture : What are the risks of revealing mistakes in an open culture, as a way of being transparent with patients and families? What are the risks of concealing mistakes and errors
Mean between two populaces : It is altogether unique in relation to the t-test and the chi-square test of freedom.
Estimate the optimum diameter per foot of packed height : Cost of installed unit, complete with distributor plates, supports, and all auxiliaries = 2.0 times purchased cost of shell and packing
Relative frequency table to summarize : Two thousand two hundred frequent business travelers are asked which midwestern city they prefer: Indianapolis, Saint Louis, Chicago, or Milwaukee. 112 liked Indianapolis best, 452 liked Saint Louis, 1295 liked Chicago, and the remainder preferred..
How important is privacy to you personally : How important is privacy to you personally? Describe a situation, work-related or otherwise, in which you felt your privacy was threatened
Estimate the temperature of saturated steam : Estimate the temperature of saturated steam which must be used when the exchanger is new (i.e., no scale present) if the water enters the unit at a rate of 15,000 gph and is heated from 70 to 150°F.
Proportion of married couples : Can we reject the psychologist's claim that the proportion of married couples for whom her program can prevent divorce is at least 76%?

Reviews

Write a Review

Chemical Engineering Questions & Answers

  For a reversible liquid phase reaction a-r the conversion is

For a reversible liquid phase reaction A-^R, the conversion is 33.3% after 8 minutes and equilibrium conversion is 66.7%. Find the rate equation for the reaction.

  Determine the operating point and pump efficiency

Plot the system curve on the pump characteristic given in Figure and determine the operating point and pump efficiency. Properties of the fluid: density 900 kg/m3, viscosity 1.36 mN m-2 s.

  Commercial cost estimating software

Using the data on equipment costs given in this chapter or commercial cost estimating software, estimate the cost of the following equipment:

  The path followed by a fixed amount of a perfect gas during

the path followed by a fixed amount of a perfect gas during a reversible process is described by the following

  Calculate the work done in the isothermal reversible

Calculate the work done in the isothermal reversible expansion of one mole of CH4 (g) from 1.00 dm3 to 10.00 dm3 at 300 K. Treat methane as a van der Waals gas. The van der Waals gas constants for methane are: a=2.3026 dm6⋅bar⋅mol−2 and b=0.043067 dm..

  Calculate intrinsic carrier concentrations for si and ge

Estimate relative errors in the calculation of free carriers concentration when the Maxwell-Boltzman n statistics is applied for semiconductors with Ferm i energy wi thin the energy gap, if the Fenni level is 3kbT, 2k1,T, k,,T away from the ban..

  Compute graphically the flowrate and the pump head

Compute graphically the flowrate and the pump head at the operation conditions - Repeat the question for the case of two identical pumps in series

  Overlay the pourbaix diagram for water

Draw another diagram overlaying the Pourbaix diagrams for nickel and silver and use this diagram to explain the likely outcome of holding a solution of nickel ions in a silver container.

  Different types of zinc coating

Why is it important - where does galvanising fit into possible corrosion protection strategies?)

  Methane by either steam reforming

Hydrogen is manufactured from methane by either steam reforming (reaction with steam) or partial oxidation (reaction with oxygen). Both processes are endothermic. What reactor temperature and pressure would you expect to be optimal for these proce..

  Calculate the mass of the metal in gr

Calculate the mass of the metal in gr than can be prepared  from 150 grams of aluminum and 250 grams  of iron (iii) oxide

  Minute amount of radioactive americium

One type of commercial smoke detector contains a minute amount of radioactive americium-241 (241Am), which decays by -particle production.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd