Estimate the composition of the phase containing B

Assignment Help Chemical Engineering
Reference no: EM131740013

Chemical Engineering Thermodynamics Questions -

Question 1 - Assume solvents A and B are virtually insoluble in each other. Component C is soluble in both.

(a) Use the Scatchard- Hildebrand theory to estimate the distribution coefficient at low concentrations of C given as (mole fraction C in A)/(mole fraction C in B).

(b) If the phase containing A is 0.1 mol% C, estimate the composition of the phase containing B.

(c) If an extractor was designed and constructed, is the distribution coefficient favorable for extraction from B into A? Data:

 

Volume (cm3/mole)

δ(cal/cm3)½

A

50

5.8

B

250

10.4

C

100

9.8

Question 2 - The bubble point of a liquid mixture of n-butanol and water containing 4 mol% butanol is 92.7oC at 1 bar. At 92.7oC the vapor pressure of pure water is 0.784 bar and that of pure n-butanol is 0.427 bar. Assuming the activity coefficient of water in the 4% butanol solution is near unity, estimate the composition of the vapor and activity coefficient of butanol that gives the correct bubble pressure and compare to the values estimated by UNIFAC.    

Question 3 - Water + hexane and water + benzene are immiscible pairs.

(a) The binary system water + benzene boils at 69.4oC and 760 mmHg. What is the activity coefficient of benzene in water if the solubility at this point is xB = 1.6E-4, using only this information and the Antoine coefficients?

(b) What is the vapor composition at the bubble pressure at room temperature (292 K) for a ternary mixture consisting of 1 mole overall of each component if the organic layer is assumed to be an ideal solution?

(c) What is the vapor composition at the bubble pressure at room temperature (292 K) for a ternary mixture consisting of 1 mole overall of each component if the activity coefficients of the organic layer are predicted by UNIFAC?

Question 4 - A 50 wt% (22.5 mol%) solution of ethylene glycol + water freezes at about 240 K.

(a) What freezing temperature would be predicted by assuming that ethylene glycol and water form an ideal solution? The freezing occurs by formation of water crystals.

(b) Does your calculation indicate that the system has positive or negative deviations from Raoult's law? Why?

Reference no: EM131740013

Questions Cloud

Prepare one overall strategy for developing a process model : Prepare one overall strategy for developing a process model for this company that will increase the response rate of its e-mail advertising.
Plot the net present value profile : Develop the timeline (linear representation of the timing of cash flows). Plot the Net Present Value profile (NPV on Y axis and rates of return on X-axis).
Prepare a presentation about amazon merge whole foods : Prepare a presentation about Amazon merge Whole Foods. Focus on valuation and Industry company analysis(use data and charts).
What are the important considerations that are tied : What you know about the channel design process, respond to the following: What are the important considerations that are tied to this decision?
Estimate the composition of the phase containing B : Assume solvents A and B are virtually insoluble in each other. If the phase containing A is 0.1 mol% C, estimate the composition of the phase containing B
Why did the federal reserve bank of new york believe : Why did the Federal Reserve Bank of New York believe it was necessary to intervene after it became aware of LTCM's problems?
Why you chose the stock including descriptive analytics : Why you chose the stock including descriptive analytics of your choice (P/E, Dividends, Current news, etc.). Credit dividends to cash during the holding period.
Create scenario where you intentionally misstate liabilities : Create a scenario where you can intentionally misstate liabilities for one personal financial gain. Who is considering in purchasing bond from selected company.
Describe at least one episode of a television show : Briefly describe at least one episode of a television show in which you observed aggression or violence.

Reviews

Write a Review

Chemical Engineering Questions & Answers

  Why a substance heated at a fast rate

Why a substance is being heated at a fast rate the temperature of decomposition

  Design variables necessary for sizing equipment

Assist with the setting of design variables necessary for sizing equipment

  Solve the initial value problem

Use Laplace transformation to solve the initial value problem

  Baffled tank with a six blade turbine agitator

Equal rates of mass transfer for the production of the fine chemical are required. This is often required for certain types of organic synthesis.

  Adsorption and membranes processes

Application of reverse osmosis principles for the desalination of sea water

  Evaluation of a new chemical manufacturing process

Prepare the design and evaluation of a new chemical manufacturing process.

  Adsorption and membrane processes

Adsorption and Membrane Processes

  Draw t-s diagram of the cycle

Draw T-S diagram of the cycle.

  Materials chemistry find potential energy between two atoms

The potential energy between two atoms A and B are constants and r the interatomic separation distance.

  Implications of the future of fabrication for international

Implications of the future of fabrication for international trade, transportation, and logistics

  Evaluate the work done by the gas

The atmospheric pressure of 100k Pa acts on the other side of the piston. The gas is heated until the volume is doubled and the final pressure is 500 kPa. Calculate the work done by the gas.

  Evaluate particle diameter at different gas velocities

Evaluate particle diameter at different terminal gas velocities

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd