Estimate the communitys water requirements in 2010

Assignment Help Civil Engineering
Reference no: EM13320275

A community had a population of 200,000 in 1995 and it is expected that this will increase to 260,000 by 2010. The water treatment capacity in 1995 was 165 ML/day. A survey showed that the average per capita water use rate was 700 L/(person.day). Estimate the community's water requirements in 2010 assuming

i) No change in use rate, and

ii) A reduced rate of 600 L/(person.day).

iii) Will expanded treatment facility be needed by 2010 for condition (i)? For condition (ii)?

Reference no: EM13320275

Questions Cloud

Find the horizontal component of initial velocity : A projectile is shot from the ground at an angle of 55 degrees with respect to the horizontal, and it lands on the ground 5 seconds later. find the horizontal component of initial velocity
Calculate the per capita contribution of domestic flow : A rural town with sewered population of 4,500 has a daily wastewater flow of 1,590 m3/day with an average BOD of 280 mg/L including industrial wastes. The industrial discharges to the municipal sewers are 57 m3/day at 1,800 mg/L BOD
Costs production quantity : All of the following types of cost are relevant to making a financial decision except: Opportunity Costs ,Direct Costs,Sunk Costs,Unavoidable Costs Production Quantity increases proportionate with:Sunk CostsRecurring Costs, Variable Costs d) Margi..
Determine the total mechanical energy of the system : A 2.10 kg mass attached to a spring oscillates with a period of 0.375 s and an amplitude of 20.5 cm. Find the total mechanical energy of the system
Estimate the communitys water requirements in 2010 : The water treatment capacity in 1995 was 165 ML/day. A survey showed that the average per capita water use rate was 700 L/(person.day). Estimate the community's water requirements in 2010
Explain penaltyies that can be imposed on manager : Explain the penalty(ies) that can be imposed on a manager by the monitoring and enforcement mechanisms in place to restrict such activity.
Why are viruses difficult to remove from water supply system : Compare the relative contributions of a treated water supply and the collection, treatment and disposal of human wastes towards the control of epidemic diseases in developing countries.
Find the resultant force on the body : A body of mass 2.65 kg moves along the x-axis, and its motion is described by the equation x = 6 sin (13 t + 2), Find the resultant force on the body at t = 0.100 s
Determine the depth of flow if the flow is to be non-erosive : A trapezoidal channel is to be excavated in alluvial material on a bed slope of 1:10000. The side slopes will be 1(vertical) : 2(horizontal). Details of the bed material are as follows: Particle diameter 4 mm

Reviews

Write a Review

Civil Engineering Questions & Answers

  Find what is probability of failure with standard deviation

A column has a mean capacity of 950 kip. The standard deviation for the column capacity is 50 kip. The average load is 700 kip with a standard deviation of 75 kip. What is the probability of failure, pf

  Explain will the vertical curve meet minimum ssd standards

A particular crest vertical curve has long been criticized as being unsafe. Its length is 400 ft. The prevailing speed on the crest vertical curve is 50 mph. In its present condition, its tangent grades are +2% and -3%.

  Determine the direction of the resultant force measured

If F_1=470N and theta=26 degrees, determine the magnitude of the resultant force of the three forces acting on ring A. Determine the direction of the resultant force measured counterclockwise from the positive x-axis.

  What percentage of families own both a dog and a cat

In a certain community 36% of the families own a dog, and 22 percent of the families that own a dog also own a cat. In addition 30 percent of the families own a cat. a.) what percentage of families own both a dog and a cat

  Determine station of pvc and pvt and design speed of curve

An equal-tangent crest vertical curve connects a +3.2% and -1.1% grade. The PVI is at station 98+20. Due to drainage considerations, the highest point of the curve is at station 100+79.35.

  What is the speed that the observer at a records

Car B is driving straight toward the point O at a constant speed v. An observer, located at A, tracts the car with a radar gun. What is the speed |r(dot)B/A| that the observer at A records

  Determine the net power output of the engine

The cycle has a thermal efficiency of 35%, and steam changes from saturated vapor at 300 C during the heat addition process. If the mass flow rate of the steam is 2kg/s, determine the net power (kw) output of this engine.

  What is the effective stress 20feet deep for specific weight

Effective stress is defined as the overburden soil pressure less the buoyancy effect of water. What is the effective stress 20 feet deep if the specific weight of the dry soil is 113 pcf and the water table is 11 feet deep

  What percent removal of particles would be expected

if the settling velocity of a particle is 2.80 mm/s and the overflow rate of an up flow clarifier is 0.560 cm/s, what percent of the particles are retained in the clarifier. If the flow rate of this problem is doubled

  How to derive the unit hydrogaph by the inverse procedure

Given below are the measured stream flows in cfs from a storm of 6-hour duration on a stream having a drainage area of 185 mi^2. Derive the unit hydrogaph by the inverse procedure. Assume a constant base flow of 550cfs.

  Compute the maximum service

Compute the maximum service (unfactored) concentrated live load that can be applied at 1ft from the free end of the cantilever. Use load and strength -reduction factors from ACI Code Sections 9.2 and 9.3. Also check As,min.

  Determine min horizontal force p required to hold the crate

Determine the minimum horizontal force P required to hold the crate from sliding down the plane. The crate has a mass of 70kg and the coefficient of static friction between the crate and the plane is μs = 0.45.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd