Estimate the average concentration of methylene chloride

Assignment Help Chemistry
Reference no: EM13131603

Laboratory ventilation
1. Think and describe what you would do in each of the following situations which could happen in your laboratory.
a. You are working at your station and the 100-mL round-bottom flask in which you are running a reaction in ether solvent suddenly catches fire.
b. The person working across the laboratory bench from you allows hydrogen chloride gas to escape from his or her apparatus.
c. A reagent bottle is dropped, spilling concentrated sulfuric acid
d. A hot solution 'bumps" splashing your face.

2. A laboratory has four hoods each of which is 39 in. wide. When the hood door is open to a height of 8 in. and the hoods are operating, the average
air velocity through the hood face is 170 ft/min.

a. Evaluate the total ventilation rate for this room assuming that there are no other exhausts.
b. The laboratory is designed for use by 30 students. Evaluate the air available per student if the mixing factor is 0.3, and experiments last for 3 hours.
c. An experiment is _considered in which each student would be required to evaporate 7 mL of methylene chloride (CH2CI2).

Estimate the average concentration of methylene chloride. Look up the TL V or the 1WA for methylene chloride and consider how the:
evaporation might be performed.

3. A laboratory has a ventilation system that provides 20 cubic meters for each student during laboratory period. (This figure includes the mixing factor.) An experiment is considered for this program that uses the following quantities of materials A, B, and C. The TLV is also listed for each compound.
§substance Quantity (ma) TL V (mg/cubic meter)

A 400 1200
B 500 200
C 200 5

Assess the relative risks of these three compounds. Is there a likely need for operations to be conducted in a hood if the compounds are assumed to be
entirely evaporated?

Reference no: EM13131603

Questions Cloud

Calculate the pressure of the gas inside the cylinder : a cylinder measuring 3.4 cm wide and 4.0 cm high is filled with gas. The piston is pushed down with a steady force measured to be 275 kpa
Find probability to visit both you and your neighbor bill : The traveling salesperson randomly selects 5 apartments in your building to visit. What is the probability that she visits both you and your neighbor bill?
Prepare the journal entries for the issuance of the bonds : XYZ Company is building a new hockey rink at a cost of $1,500,000. It received a down payment of $500,000 from local businesses in support of the project and now needs to borrow $1,000,000 to complete the project. It therefore decides to issue $1,..
What is the actual total direct labor cost : Production for the current period was assigned a $200,000 standard direct labor cost. What is the actual total direct labor cost for the current period?
Estimate the average concentration of methylene chloride : Estimate the average concentration of methylene chloride. Look up the TL V or the 1WA for methylene chloride and consider how the: evaporation might be performed.
What is the reducing agent in the redox reaction : The amount of H2O2 in 15.8g of hair bleach was determined by titration with a standard potassium permagnate soln. MnO4-(aq)+H2O2(aq)--Mn2+(aq)+O2
Find probability that a student will complete the exam : What is the probability that a student will complete the exam in more than 60 minutes but less than 75 minutes?
End of the fiscal period : Suppose that nominal accounts are not closed out at the end of the fiscal period. Explain how this affects account data for the next fiscal period. Use a company or industry to help explain your answer.
Illustrate what amounts should be considered product : Eighty percent of the premium applies to manufacturing operations and 20% applies to selling and administrative activities. Illustrate what amounts should be considered product and period costs respectively for the first year of coverage?

Reviews

Write a Review

Chemistry Questions & Answers

  Explain the difference in densities at the two temps

In which state is the average distance between molecules the greatest?, Explain the difference in densities at the two temps in terms of the kinetic molecular theory.

  Calculate the molarity of kio3 in the solution

A solution contained KIO3 and excess KI. 25 cm3 of this solution were acidified and the liberated I2 required 26.8 cm3 of 0.1 M Na2S2O3 for complete recaction.

  What is the equilibrium partial pressure of n2o4

A 1.90 mole quantity of NOCl was initially in a 1.50 L reaction chamber at 400°C. After equilibrium was established, it was found that 36.0 percent of the NOCl had dissociated.

  What is the molar mass of substance

What is the molar mass of this substance, express your answer in g/mol and  determine the moloar concentraitions Cr 2 O 7 ^2 and of K + ?

  Define why this series of reaction will produce

Fully explain why this series of reaction will produce the 3,5-dibromotoluene and direct bromination of toluene produces the 2,4-dibromotoluene.

  Calculate the dm3 of carbon dioxide gas

If 20.0 dm3 of methane, CH4, react with 200.0 dm3 of air at STP, calculate the dm3 of carbon dioxide gas produced.

  Calculate the final temperature of the mixture

A 12.0-g sample of ice at -19.0°C is mixed with 115.0 g of water at 72.0°C. Calculate the final temperature of the mixture assuming no heat loss to the surroundings.

  What will be the velocity of the escaping electrons

What will be the velocity of the escaping electrons under these conditions? What is the de Broglie wavelength of the escaping electrons?

  What pressure is needed to reduce the volume

A sample of helium gas has a volume of 241 mL at 0.83 atm. What pressure is needed to reduce the volume at constant temperature to 35 mL.

  What''s the liquid

An unknown liquid with a boiling point of 58 C at 670 mmHg is soluble in water, cyclohexane and alcohol, what's the liquid.

  What is the density of a block of marble

What is the density of a block of marble that occupies 350 cm3 and has a mass of 660 g?Answer in units of g/cm

  How many grams of solid naocl must be added

how many grams of solid NaOCl must be added to 50 mL of .14 molar HOCl to obtain a buffer solution with a pH of 7.49.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd