Estimate low-dose cancer risk from occupational inhalation

Assignment Help Civil Engineering
Reference no: EM13300757

the recommended threshhold limit value ( TLV-ACGIH) air concentration for occupational exposure to water-insoluble hexavalent chromium Cr (VI) is 0.01 mg/M^3. this concentration is based on an assumption that the individual is generally healthy and is exposed for 8 hours per day over a working lifetime ( that is from age 18 to 65 years). assuming a body weight of 78 kg and an inhalation rate of 0.63 m^3/h over the working life of the individual,

a. what is the lifetime (75y) CDI?

b. estimate the low-dose cancer risk from occupational inhalation exposure to hexavalent chromium.

c. calculate the high risk, use the one hit assumption of Cr (VI) as cacinogen

Reference no: EM13300757

Questions Cloud

Iron needs during pregnancy are easily met through the diet : Iron needs during pregnancy are easily met through the diet.
Feature of calcium nutrition in pregnancy : Which is TRUE about neural tube defects? Which of the following is a feature of calcium nutrition in pregnancy?
What is the placenta : What is the placenta? Which is TRUE about neural tube defects?
What is the marginal cost of making one additional chair : What is the marginal cost of making one additional chair and how much money will the company make or lose on this order?
Estimate low-dose cancer risk from occupational inhalation : this concentration is based on an assumption that the individual is generally healthy and is exposed for 8 hours per day over a working lifetime ( that is from age 18 to 65 years). assuming a body weight of 78 kg and an inhalation rate of 0.63 m^3..
Alcohol consumption during pregnancy : Alcohol consumption during pregnancy: Women who are overweight when starting their pregnancy
State must be the velocity in m/s of a beam of electrons : What must be the velocity, in m/s, of a beam of electrons if they are to display a de Broglie wavelength of 1 nm? (the mass of an electron is 9.109x10 -28 g)
Determine the elastic and plastic section modulus of i-beam : Determine the elastic and plastic section modulus of the I-beam. The axis runs through the center of the beam on both x and y axis (completely symmetrical). Beam properties: h= 12inches tf= 0.5 inches bf= 6 inches tw= 0.25 inches
What value of charge is on each capcitor : A 10-uF, a 20-uF, and a 50-uF capacitor are connected in series across a 160 volt source. What value of charge is on each capcitor

Reviews

Write a Review

Civil Engineering Questions & Answers

  What is stress to load ratio at depth of 2b below the centre

for a uniformly loaded square area, what is the stress to load ratio at a depth of 2B below the CENTER of the loaded area

  Find require diameter of bar according to max stress critera

A bar with a circular cross-sectional area is made of SAE 1045 carbon steel having a yield stress of sY = 1000 MPa. The bar is subjected to a torque T=3.75 kNm and a bending moment M=7 kNm. Using a factor of safety FS=2 with respect to yielding

  Describe the present land capability classification system

Describe the present land capability classification system for agriculture in the caribbean, Identifying its limitations and propose recommendations. 200 word limit

  Tighten the packing on a leaking argon valve

A worker needs to enter a confined space to tighten the packing on a leaking argon valve. Describe two procedures that could be used to isolate the argon line and valve prior to starting work.

  Determine the force n exerted by the fixed circular slot

At the instant when angle theta= 50 degree, the horizontal guide is given a constant upward velocity v0 = 1.3 m/s. For this instant calculate the force N exerted by the fixed circular slot and the force P exerted by the horizontal slot on the 0.60..

  What is the runoff rate into the inlet grate

If the detention storage on the paved section is increasing at the rate of 60 m3/hr, what is the runoff rate into the inlet grate?

  What length l of splice plate is needed

two strips of a plastics material are bonded together as shown. The average shearing stress in the glue must be limited to 1000 kpa. what length L of splice plate is needed if the axial load carried by the joint is 55 kN and the width (W) is 315 m..

  Calculate the space-mean speed of these four vehicles

A radar device is installed at a location on the roadside to measure instantaneous speeds of vehicles passing that location. The initial four vehicles' speeds are listed. Calculate the space-mean speed of these four vehicles.

  Cause of pavement damage

On a flexible pavement with a 3 inch hot mix asphalt (HMA) wearing surface, a 6 inch soil cement base and an 8 inch crushed stone subbase, which truck will cause more pavement damage?(Suppose drainage coefficients are 1.0).

  Derive an equation for concentration of a chemical in a lake

Account for chemical reactions, groundwater flows, streams, precipitation, evapotranspiration. Indicate any assumptions that can be made to simplify your equation.

  Estimate low-dose cancer risk from occupational inhalation

the recommended threshhold limit value ( TLV-ACGIH) air concentration for occupational exposure to water-insoluble hexavalent chromium Cr (VI) is 0.01 mg/M^3. this concentration is based on an assumption that the individual is generally healthy an..

  Determine the components of the reactions at a and g

Two 9-in.-diameter pipes (pipe 1 and pipe 2) are supported every 7.5 ft by a small frame like that shown. Knowing that the combined weight of each pipe and its content is 30 lb/ft and assuming frictionless surfaces

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd