Estimate a value of msw generation in the year 2025

Reference no: EM13563769

The United States Environmental Protection Agency (EPA) has published the following data for municipal solid waste generation (in millions of tons).

Year: 1960 1965 1970 1975 1980 1985 1990 1995 2000

MSW: 88 104 121 128 152 166 205 221 249

a) Assume that the growth is exponential (i.e., plot the log of generation versus time) and calculate a value for the annual growth rate (% / yr).

b) If the annual rate of population growth is 1.8%, calculate a value of the annual rate of growth in per capita generation of solid waste.

c) Estimate a value of MSW generation in the year 2025.

d) Suggest one method that might be used to decrease the rate of growth in per capita generation rate

Reference no: EM13563769

Questions Cloud

Does this require when the process is isentropic : The compressor of a refrigerator compressed saturated R-134a vapor at 5 F to 200 pisa. How much work (ft-lbf/lbm) does this require when the process is isentropic

Determine the net power output of this engine : Consider a Carnot heat-engine cycle executed in a steady-flow system using steam as the working fluid. The cycle has a thermal efficiency of 35%, and steam changes from saturated vapor at 300 C during the heat addition process. If the mass flow rate ..

Find the linear velocity of the lifter with respect to point : A circular cam is in contact with a rectangular lifter and used to intermittently operate a piece of equipment at the end of a lifter arm. The lifter is constrained to move only in the vertical direction. The cam has a radius of r = 7.2in and is rota..

Determine the horizontal components of the forces necessary : A 6 foot diameter pipleine carries water at a temperature at 60F at a steady flow rate of 60 cubic feet per second. The pipeline makes a 90 degree horizontal bend.

Estimate a value of msw generation in the year 2025 : The United States Environmental Protection Agency (EPA) has published the following data for municipal solid waste generation (in millions of tons).

What percent removal efficiency may be expected under : A cyclone separator is being used to remove particulates from a gas stream. The current removal efficiency is 96% for an air flow rate through the separator equal to 18 m3/s. Due to a process change, the air flow rate is expected to increase to 22 m3..

Calculate a value of temperature that could be used : A correlation for particulate removal efficiency in an electrostatic precipitator (n) as a function of gas velocity (u) may be written in the form: n = 1 - e^-k / u.

Determine the proportional limit stress the modulus : At the proportional limit, a 32-mm-thick by 87-mm-wide bar elongates 10.2 mm under an axial load of 532 kN. The bar is 2.4 m long. Poisson%u2019s ratio, , for the material is 0.27.

Can one collector be temporarily taken out of service by : Dust is removed from the airstream of a municipal incinerator by four dust collectors operating in parallel, each handling 1/4 of the total airflow of 200 m3/min. The airstream contains 10 g/m3

User Account

All Pages