Drawdown at an observation well 15m from the pumped

Reference no: EM13560352

A confined aquifer 30.0m thick has been pumped from a fully penetrating well at a steady rate of 5,000 m^3/day for a long time. Drawdown at an observation well 15m from the pumped well is 3.0 m and a drawdown at a second observation well 150 m away is 0.30 m. Find the hydraulic conductivity of the aquifer.

Reference no: EM13560352

Questions Cloud

Determine the new value of l if the flowrate stayed the same : When a channel of triangular cross section was new, a flowrate of Q caused the water to reach L = 2 m up the side of the channel. After considerable use

Determine the new depth if the flow rate remains the same : Overnight a thin layer of ice forms on the surface of a 40-ft-wide river that is essentially of rectangular cross-sectional shape. Under these conditions, the flow depth is 3 ft. During the following day the sun melts the ice cover.

Sketch the specific energy diagram and indicate : Water in a rectangular channel flows into a gradual contraction section. If the flowrate is Q = 25 ft^3/s and the upstream depth is 2 ft, determine the downstream depth. Sketch the specific energy diagram and indicate its important characteristics. N..

Determine the hydraulic conductivity of the aquifer : Drawdown at a 0.20-m-diameter, fully penetrating well, which has been pumping at the rate of 1000 m^3/day for a long enough time that steady-state conditions have been reached, is determined to be 0.70 m.

Drawdown at an observation well 15m from the pumped : A confined aquifer 30.0m thick has been pumped from a fully penetrating well at a steady rate of 5,000 m^3/day for a long time. Drawdown at an observation well 15m from the pumped well is 3.0 m and a drawdown

Design a cantilever beam made of reinforced concrete : Design a cantilever beam made of reinforced concrete. The rectangular beam is 18 ft long and subjected to a uniformly distributed dead load of 1.5 kip/ft (not including the beam weight)

Calculate the mean value of f and an expression for its : The depth of water, H, behind a gravity dam is normally distributed with a mean of 100' and variance of 2,500 ft2. The total hydrostatic pressure against the dam is F=?H2/2, where ? is the unit weight of water (62.4 pcf).

Use the watch as a navigation : Use the watch as a navigation

Determine the irr of building the corrosion-resistant tower : Determine the IRR of building the corrosion-resistant tower. (Hint: Calculate interest rates from 7% to 11% using formulae provided in tables).

User Account

All Pages