Draw to scale the streakline-path-line of the particle

Assignment Help Civil Engineering
Reference no: EM13313235

For a given hypothetical flow, the velocity from time t=0 to t=5 seconds was u=2 m/s , v=0. Then, from time t=5 s to t=10 s, the velocity was u=+3 m/s, v=-4 m/s. A dye streak was started at a point in the flow field at time t=0, and the path of the particle in the fluid was also traced from that same point starting at the same time. Draw to scale the streakline, path-line of the particle, and stramlines at time t=10 s.

Reference no: EM13313235

Questions Cloud

What is the terminal speed if he falls feet first : A 75 kg skydiver can be modeled as a rectangular box withdimensions of 20cm x 40 cm x 180 cm. What is the terminal speed if he falls feet first
Find the centripetal force on the stone : A boy ties a small stone to one end of a string and holding the other end, he whirls the stone above his head in a horizontal circle. If the stone has a mass of 0.5 kg, find the centripetal force on the stone
Explain the reaction of 3 g of ethane with excess o2 : How many liters of CO2 at 0 °C and 380 torr are obtained in the reaction of 3 g of ethane with excess O2
Data center design reduce hvac requirements : What aspects of data center design reduce HVAC requirements?
Draw to scale the streakline-path-line of the particle : A dye streak was started at a point in the flow field at time t=0, and the path of the particle in the fluid was also traced from that same point starting at the same time. Draw to scale the streakline, path-line of the particle
Find the most interesting in regards to migratin : What did you find the most interesting in regards to migrating to a cloud solution from a customer perspective?
What is the charge on each if the force is attractive : Two point charges totaling 7.50 µC exert a repulsive force of 0.250 N on one another when separated by 0.619 m. What is the charge on each if the force is attractive
Determine the strains in each of the transveral axes : A 12inx1inx3in ASTM 36 steel bar is loaded with an axial load of 90,000lbs and a transversal load of 288,000lbs (force applied perpendicular to the 1in side) The proportionality limit is 34,000psi.
What is the mass of the second car : A 9800 kg boxcar traveling at 19 m/s strikes a second boxcar at rest. The two stick together and move off with a speed of 13 m/s

Reviews

Write a Review

Civil Engineering Questions & Answers

  Calculate the angles made by f with the positive x

A force is specified by the vector F= 120i-160j+80k lb. Calculate the angles made by F with the positive x-,y-, and z- axes.

  What is the moment of the tension force acting at a

using the principles to developed in chapter 3 on equilibrium, one can determine that the tension in cable AB is 143.4 N. Determine the moment about the x-axis of this tension force acting on point A.

  Determine the required source temperature of heat sink

A Carnot heat engine is supplied with a high temperature heat source at a rate of 200 kW. If the power output of the heat engine is 120 kW, determine the required source temperature if the heat sink temperature is 20 °C.

  Determine the coefficient of thermal expansion

Determine the coefficient of thermal expansion (in m/m.K) for the material over the temperature ranges - Determine i. the phases present

  Determine how high an elevated reservoir must be

Often times, this pressure comes from the fact that community's water supply is stored in an elevated reservoir. Determine how high an elevated reservoir must be so that the water supply has a pressure of 50 psi. Given: the unit weight of water is..

  Determine the maximum axial compressive force to the bar

A short 60mm diameter circle bar is made of material for which the maximum safe compressive strees is 80 MPa and the maximum safe shearing strees is 30 MPa.

  Determine the resulting velocity of center of the cylinder

a 9in radius cylinder of weight 18lb rests on a 6lb carriage. the system is at rest when a force p of magnitude 2.5 lb is applied ( p is coming out of the car the cylinder is sitting on and going to the right) for 1.2s.

  Determine drop structure is to be installed as grade control

To protect the channel from erosion, the normal flow velocity for the design discharge has to be reduced to 7.0 fps or below, and the flow Froude number must be reduced to 0.80 or below.

  Determine how many combinations of 2 books can be selected

A customer randomly select 2 of 10 books to purchase. How many combinations of 2 books can be selected

  Compute the magnitude of the load changes in length

A brass alloy has a yield strength of 280 MPa, a tensile strength of 390 MPa, and an elastic modulus of 105 GPa. A cylindrical specimen of this alloy 12.7 mm in diameter and 250 mm long is stressed in tension and found to elongate 7.6 mm

  What minimum size pipe laid on the respective minimum slope

A MH at an intersection has an inflow from three 8-inch PVC (n = 0.01) sanitary sewer pipes laid at minimum slope converging at an intersection and one pipe taking the flow from those three further downstream.

  What percentage of removal should be expected for particles

Assume the settling tank behaves like an ideal sedimentation tank, what percentage of removal should be expected for particles with a settling velocity of 0.002 m/sec

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd