Draw the waveform timing approximately to scale

Assignment Help Electrical Engineering

Reference no: EM131384585

A series of digital bits are driven from a digital pin card at a rate of 1 MHz (1-μs period). The series of bits are 10110X1. The format for this pin is set to return-to-zero (RZ) format. Its initial state is set to logic low. The start time for the drive data is set to 500 ns, and the stop time is set to 900 ns. Draw this waveform using the notation in Figure 2.8. Draw the waveform timing approximately to scale. Next, draw the waveform that would result if we set the format to non-return-to-zero (NRZ). To produce these waveforms using clocked digital logic without timing and formatting circuits, what clock rate would be required? If we wanted to be able to set the start and stop times to 500 ns and 901 ns, respectively, at what rate would we have to operate the clocked digital logic?

Reference no: EM131384585

Questions Cloud

What is the worst-case output voltage : A 6-V voltage regulator is rated to have a load regulation of 2% for a maximum load current of 20 mA. Assuming a no-load output voltage of 5.9 V, what is the worst-case output voltage at the maximum load current?

What is the input resistance : A voltage of 1.2 V is dropped across an input pin when a 100-μA current is forced into the pin. Subsequently, a 1.254-V level occurs when the current is increased to 200 μA. What is the input resistance?

Create a meal diary for yourself for one day : Create a meal diary for yourself for one day. Create a healthy version of each meal and snack and an unhealthy version. Write a summary of the meal including the required elements listed. Include references in APA format for any sources used. Ans..

Discuss specific characteristics that could be monitored : Discuss specific characteristics that could be monitored through variable control charts, the form of data to collect, and the appropriate control chart in the given situations:

Draw the waveform timing approximately to scale : If we wanted to be able to set the start and stop times to 500 ns and 901 ns, respectively, at what rate would we have to operate the clocked digital logic?

What are considerations in interpretation of control charts : Is it possible for a process to be in control when its control chart is based on observations from the process but to be out of control when the control chart is based on a specified standard? Explain.

What is its load regulation : The output of a 5-V voltage regulator varies from 5.10 V under no-load condition to 4.85 V under a 5 mA maximum rated load current. What is its load regulation?

What type of control chart would suitable in given context : Thus, a critical quality characteristic is selected for monitoring from each product. What type of control chart would be suitable in this context? What assumptions are necessary?

What is the psrr if the measured gain is 9.8 v/v : The power supply voltage is then changed to 5.1 V and the output measurement changes to 1.708 V. What is the PSS? What is the PSRR if the measured gain is 9.8 V/V?

User Account

All Pages