Draw mohrs circle for a point on top of the cross-section

Assignment Help Mechanical Engineering

Reference no: EM13619073

A simply supported beam of length 18 ft. is subjected to a trapezoidally distributed load that has a value of 3 kip/ft at x=0 ft. and 6 kip/ft at x=18ft.. The beam is made of a low carbon steel that has a yield strength of 48 ksi. Select the lightest W-beam that will support the distributed load. Furthermore, the maximum deflection cannot be more than 0.8 in..

1. Determine the reactions at the supports due to the applied load.

2. Draw SF and BM diagrams.

3. Determine the maximum moment, shear force.

4. Use the equations for normal stress to determine the section modulus.

5. Use tables to determine the W-beam that has the lowest section modulus that is bigger than the above.

6. Calculate the I for the beam by using the allowable deflection. See if the beam from 5 has this I. If not, choose a different W-beam.

7. Take into account the weight of the beam and check to make sure that the beam can support the applied load as well as the self weight. In addition, check to make sure that the shear strength of the beam is not exceeded.

8. Provide a plot of the deflection curve of the beam.

9. Provide a plot of the slope of the deflection curve of the beam.

10. Draw Mohr's Circle for a point on top of the cross-section of the beam where the maximum bending moment occurs. Determine the principal stresses and draw an element showing the principal planes.

Reference no: EM13619073

Questions Cloud

The compression ration in an air-standard otto cycle is 8 : the compression ration in an air-standard otto cycle is 8. at the begining of the compression stroke the pressure is

A electromagnetic wave strikes a 191-cm2 section of wall : an electromagnetic wave strikes a 1.91-cm2 section of wall perpendicularly. the rms value of the waves magnetic field

What is the electric field strength at the midpoint between : two 2.0-cm-diameter insulating spheres have a 6.70cmspace between them. one sphere is charged to 83.0nc the other to -

If the population standard deviation is 123 bushels per : the state department of agriculture is trying to determine the average corn yield for farmers in the state. they take a

Draw mohrs circle for a point on top of the cross-section : a simply supported beam of length 18 ft. is subjected to a trapezoidally distributed load that has a value of 3 kipft

The temperature of the parallel surfaces at the both ends : consider a 1-cm-diameter and 0.3-m-long copper rod kcopper 400 wm-k with its ends fixed to two parallel surfaces. the

Find the mass flow rate that can generate 85 mw of power : design a stationary steam power plant operating on an ideal closed loop rankine cycle that can deliver 85 mw of net

Calculate a the power required by the compressor in kw b : he vapor compression heat pump operates at steady state using refrigerant 22 whose flow rate is 6kgmin. the heat pump

A heat engine absorbes 25 mw from a 400 c combustion : a heat engine absorbes 25 mw from a 400 c combustion chamber and rejects 15 mw to the atmosphere at 30 c. find the

User Account

All Pages