Draw mohrs circle for a point on top of the cross-section

Assignment Help Mechanical Engineering

Reference no: EM13617801

A simply supported beam of length 18 ft. is subjected to a trapezoidally distributed load that has a value of 3 kip/ft at x = 0 ft. and 6 kip/ft at x = 18 ft.. The beam is made of a low carbon steel that has a yield strength of 48 ksi. Select the lightest W-beam that will support the distributed load. Furthermore, the maximum deflection cannot be more than 0.8 in.

Please use the following steps in choosing the beam:

1. Determine the reactions at the supports due to the applied load.

2. Draw SF and BM diagrams

3. Determine the maximum moment, shear force

4. Use the equations for normal stress to determine the section modulus.

5. Use tables to determine the W-beam that has the lowest section modulus that is bigger than the above.

6. Calculate the I for the beam by using the allowable deflection. See if the beam from step 5 has this I. If not, choose a different W-beam.

7.Now, take into account the weight of the beam and check to make sure that the beam can support the applied load as well as the self-weight. In addition, check to make sure that the shear strength of the beam is not exceeded.

8. A plot of the deflection curve of the beam

9. A plot of the slope of the deflection curve of the beam

10. Draw Mohrs Circle for a point on top of the cross-section of the beam where the maximum bending moment occurs. Determine the principal stresses and draw an element showing the principal planes.

Reference no: EM13617801

Questions Cloud

What is a lissajous figure be sure to a discuss how one is : 1 what is the purpose of the deflection plates in the crt?2 how does the oscilloscope produce a stationary pattern of

What is the difference between speculation and hedging why : what is the difference between speculation and hedging? why do business managers use hedging strategies? des hedging

What is arbitrage in financial markets would you normally : what is arbitrage? in financial markets would you normally expect arbitrage opportunities to exist frequently? why or

There is an induced emf in the circuit causing the bulb to : a pair of parallel conducting rails is separated by 55.0 cm. they are joined at one end by a circuit component

Draw mohrs circle for a point on top of the cross-section : a simply supported beam of length 18 ft. is subjected to a trapezoidally distributed load that has a value of 3 kipft

Why is china concerned about the value of us dollar what : as president barack obama prepares to depart thursday for his first asia trip chinese premier wen jiabao is urging the

What is the potential difference across each capacitor : capacitors c115uf and c223uf are each charged to 10v then disconnected from the battery without changing the charge on

According to this article what is the interdependency : the good news is gamble believes china will continue to buy u.s. treasuries which should come as a relief to those

If we wanted to find out how period and spring constant : if we wanted to find out how period and spring constant relate to each other how would we go about finding the spring

User Account

All Pages