User Account

All Pages

Draw a sectional view showing slab sheathing and joists

Assignment Help Mechanical Engineering
Reference no: EM131169029

A slab form is to be built for an 8-in.-thick concrete slab. The plywood sheathing face grain is perpendicular to the joists. The maximum allowed deflection is to be the smaller of 1/360 of the span or 1/8 in. Compare the maximum allowable joist spacing for class II ply form ½ in. thick and 1 in. thick. Draw a sectional view showing slab, sheathing, and joists.

Reference no: EM131169029

Questions Cloud

Find the bending stresses that exist at mid span : The plain concrete beam shown having a rectangular cross section 10-in. wide and 18-in. deep is simply supported on a single span of 20 ft. Find the bending stresses that exist at mid span.
Determine the cost of acquisition of the machine : Determine the cost of acquisition of the machine. Provide journal entries to account for the machine on 1 July 2013 (acquisition) and on 30 June 2014
Which project is financially acceptable : Each project has a net investment outlay of $10,000 and the opportunity cost for each project is 12%.- Which project is financially acceptable.
Calculate the outer fiber stresses at mid span : Calculate the outer fiber stresses at mid span under full service load. Use the gross properties of the cross section. Use the load balancing method.
Draw a sectional view showing slab sheathing and joists : Compare the maximum allowable joist spacing for class II ply form ½ in. thick and 1 in. thick. Draw a sectional view showing slab, sheathing, and joists.
Find the maximum allowable stringer spacing : Find the maximum allowable stringer spacing if maximum allowable deflection is 1/240 of the span. Draw a sketch of the formwork.
Calculate the price of the bond you have selected : Calculate the price of the bond you have selected relative to the 5%. - Is the bond selling at a premium or a discount?
Design a plywood beam bottom form shown as an alternative : Design a plywood beam bottom form shown as an alternative in Figure 12-4. The beam will be 14 in. × 24 in. First design the class I ply form to span the clear span between 2 × 4s (single span, maximum deflection of 1/16 in.).
What are the advantages of investing in the common stock : What are the advantages of investing in the common stock rather than the corporate bonds of a company? - Compare the certainty of returns for a bond with those for a common stock.

Reviews

Write a Review

Mechanical Engineering Questions & Answers

  Determine the turbine exit quality and the cycle efficiency

Given a simple Rankine cycle with temperature and pressure from the boiler of 580°C, 10 MPa and a condenser pressure of 6 kPa, with the condensate exiting as saturated liquid. The isentropic efficiencies of the turbine and pump are 85% and 82% respec..

  A 18-m3 rigid tank contains steam at 220degc one third of

a 1.8-m3 rigid tank contains steam at 220degc. one third of the volume is in the liquid phase and the rest is in the

  Explain the temperature of the refrigerant

Find the Temperature of the Refrigerant, A closed vessel with a volume of 2 ft^3 contains 5 lb of Refrigerant 134a. A pressure sensor in the tank wall reads 71.39 lbf/in.^2 (gage).

  Carbon dioxide at 20 degrees celsius and a pressure of 550

carbon dioxide at 20 degrees celsius and a pressure of 550 kpa flows through a pipe at 0.04 ns what would be the

  Each glass bottle has an empty dry mass of 120 grams based

all makers of beverages such as breweries wineries and soda makers must wash bottles before filling. a new beverage

  A disk has a radius of 2 cm and weighs 12 kg what is the

a a disk has a radius of 2 cm and weighs 12 kg. what is the required constant moment to rotate the disk from rest to a

  Find the expression for the maximum response

Derive an expression for the time at which the response of a critically damped system will attain its maximum value. Also find the expression for the maximum response.

  For a piece of aluminum stock choose a grinding wheel that

for a piece of aluminum stock choose a grinding wheel that will grind .050 of stock from it. show the grinding wheel

  At what true event rate will dead time losses not to be

counters a and b are non-paralyzable with dead times of 30 or 100 microseconds respectively. at what true event rate

  Draw the pressure vessel large enough to show orientation

A cylindrical pressure vessel of 120 in diameter outside, used for processing rubber, is 36 ft. long. If the cylinder portion of the vessel operates at 120 psi internal pressure, what are the stresses acting on an element at the inside surface of the..

  A 230-v shunt motor develops a torque of 40 ib-ft when the

a 230-v shunt motor develops a torque of 40 ib-ft when the armature current is 11 a. find the torque developed when the

  What is the artist trying to convey

Describe the work: what is the title of the work? the size? what does it look like? what is it made out of? is hand-made? machine made? abstract or representational? it is a sculpture, installation, painting, photograph, etc? is there a relationship ..

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

Submit Assignment

Academics

Major Subjects

Majors

Get In Touch

whatsapp: +1-415-670-9521

Phone: +1-415-670-9521

Email: [email protected]

TERMS & POLICIES

HELP & SUPPORT

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd