Draw a block diagram of cellular radio network

Assignment Help Electrical Engineering
Reference no: EM13747529

In a CDMA system, the signal is spread over a large bandwidth by multiplying the transmitted symbol by a sequence of short pulses, also called chips. The system bandwidth is thus determined by the duration of a chip. If the chip duration is 0.26 ?s and the maximum excess delay is 1.3 ?s, into how many delay bins do the multipath components fall? If the maximum excess delay is 100 ns, is the CDMA systems wideband or narrowband?

Questions

Introduction

1) Write down the evolution of wireless mobile communication systems.

2) Draw a block diagram of cellular radio network.

3) Draw a timing diagram illustrating how a call to a mobile user is initiated by a landline subscriber.

4) Show the various upgrade paths for 3G technologies with a neat figure.

5) What is a cellular concept? How did it solve the problem of spectral congestion? Illustrate.

6) What is frequency reuse? Discuss the relationship between system capacity C and cluster size N with suitable derivation.

7) What is cell dragging? Illustrate umbrella cell approach.

8) Discuss co-channel and adjacent channel interferences?

Point to Multipoint System(PMP)

9) What is multiple access Method? Why is it necessary?

10) Discuss the multiple access techniques: TDMA, FDMA and CDMA in brief.

11) What is TDD and FDD? Illustrate.

Propagation Theory

12) What do you mean by multi-path propagation? Discuss a RAKE receiver with suitable diagram.

13) What is fading? Draw a tree diagram and discuss different types of fading in brief.

14) Discuss Hata Model and Okumura model.

15) Discuss space diversity considerations.

16) Differentiate between Equalization and Diversity technique.

Modulation Technique

17) Describe BPSK transmitter and receiver with the help of suitable block diagram.

18) What is coherent and non-coherent detection? List the advantage of DPSK over PSK.

19) Discuss QPSK with its constellation diagram.

GSM technology

20) Why and When GSM technology was introduced?

21) Discuss the services and features of GSM.

22) Explain GSM architecture in detail with diagram.

23) Discuss the various interfaces used in GSM with a diagram.

24) What is the modulation technique used in GSM? Discuss technical aspects of GSM radio subsystem.

25) Discuss frame and multiframe structure of GSM.

26) Present GSM air interface specifications summary with required parameters.

27) Differentiate between Full rate and Half rate traffic control channel.

28) Draw a tree diagram showing diffrernt channel types in GSM.

29) Discuss hands-off stragegy in cellular system.

30) Prove that for a hexagonal geometry, the co-channel reuse ratio is given by Q = √(3N), where N = i2+ij+j2. (Hint: Use cosing law and hexagonal cell geometry)

31) Draw the block diagram of Wireless Communication System and explain each block in detail.

32) Explain how frequency reusing is achieved in cellular systems and also explain the various methods for improving the capacity of a cellular system.

33) Discribe briefly the network architecture of a cellular mobile communication system.

34) Show that the frequency reuse factor for a cellular system is given by K/S, where K is average number of channels availabe to the cellulare service provider.

35) Briefly explain the channel assignment strategies in cellular communication.

36) Define traffic and Grade of Service(GOS). What are the assumptions based to derive Erlang B formula. State the Formula as well.

37) Explain the role of BTS and MSC.

38) Why adjacent channel interference is caused, what are the sources?

39) What are the factors affecting in the choice of digital modulation?

40) Explain the performance advantages of digital modulation over analog?

41) What is duplexing? What are the types of duplexing used in mobile communication system?

42) What is the advantage of multiple access schemes?

43) Derive path loss equation using free space propagation model.

44) Explain in brief about the hand-off strategies used in cellular communication system.

45) Why is hexagonal cell geometry chosen in cellular design?

46) Differentiate between TDMA,FDMA and CDMA.

47) List out the services that are provided in GSM.

48) Enumerate the latest advancement in mobile communication.

49) What is trunking theory? Why is the cell splitting and sectoring used?

Reference no: EM13747529

Questions Cloud

To what extent,had the intensity of white supremacy changed : To what extent,had the intensity of white supremacy changed by the 1920s from what it had been two to three decades earlier?
The average time in minutes that a student in bookstors : A college bookstore opens a booth and buys back used books during final exam week. From 9 to 12 in the morning students arrive at the rate of 40 per hour. The bookstore employee can service 50 students per hour. What is the average time in minu..
How idea of terrorism affected lives of individual americans : How has the idea of terrorism affected the lives of individual Americans since 9/11? How have American priorities changed since 9/11?
What is the effect of the lack of synchronization : What is the effect of the lack of synchronization among supply-chain members. The text mentions several common approaches to use when developing a strategy to close a capacity gap where utilization of a resource exceeds capacity available. Which of..
Draw a block diagram of cellular radio network : Draw a block diagram of cellular radio network and draw a timing diagram illustrating how a call to a mobile user is initiated by a landline subscriber.
Write an essay on three religion for guardiantutor : Write an essay on three religion for guardiantutor.
Write an essay on the brink of revolution : Write an essay On the Brink of Revolution. You read about the various causes that lead to the Russian Revolution of 1917. Create a mythical country that is on the brink of revolution today.
Review type of inhaler prescribed on the medication chart : Explain to Mr Barber in simple terms how the actions of this drug relate to the pathophysiology of emphysema and Review the type of inhaler prescribed on the medication chart provided and list the steps to correctly administer this medication.
What techniques or processes are used to create the artwork : What techniques or processes are used to create the artwork? What colors are used? Describe the use of line, shape, texture, value, color, and balance. Does the work of art have subject matter?

Reviews

Write a Review

Electrical Engineering Questions & Answers

  Find the fourier series of the signal in frequency domain

A discrete periodic signal shows the signal characteristics in one period as below. find the Fourier Series (FS) of this signal in frequency domain. write down in detail of your procedures. 1; n=1 0; n=0 x[n]{ -1; n=1 1/2; n=2 3; n=3.

  Design a critically damped series rlc circuit

Using the commonly available resistors, capacitors, and inductors, design a critically damped series RLC circuit (i.e., all three components are connected in series) with an undamped natural frequency of 20 krad/s.

  Find total complex power absorbed by the wye-connected load

A tree-phase, 60Hz, 5MVA synchronous generator has balanced line-to-line voltages of 8320V at its terminals. if the generator is supplying power to delta-connected, balanced load of 5MVA at a 0.8 lagging power factor

  Why does the mobile carrier concentration increases

b) What are the equilibrium electron and hole concentrations at 300K and 500K (hint: You will have to find Nc and Nv at 500K, but it isnt necessary for 300K) c) Why does the mobile carrier concentration increase at high temperatures

  Determine an estimate for the self and mutual inductances

The DC resistance of the primary windings of a certain transformer is found to be 22ohm while the resistance of the secondary windings is 0.8ohm. When a 60 Hz sinusoidal source is connected to the primary "with the secondary open circuited"

  Find no-load voltage of the generator and terminal voltage

A four-pole, 450-kW, 4.6-kV SHUNT GENERATOR HAS ARMATURE AND FIELD RESISTANCES OF 2 AND 333 Ohms. The generator is operating at the rated speed of 3,600 r/min.

  Determine the maximum number of hopping frequencies

An FH-BPSK signal modulated with 6kbps data has a spectrum bandwidth of 20 MHz. the BPSK signal is filtered allowing only two spectral components on either side of the carrier find the maximum number of hopping frequencies.

  Find the system response to the unit step

A system, linear and time invariant is described by the following difference equation: 4y[n-2] + 2y[n-1] + y[n] = x[n] a) Determine if the system is stable. b) Find the system response to the unit step.

  Create a circuit using only the basic gates-not-and-nor

A 6-bit answer based on the selected Operation. The error bit is turned on if either no Operation is selected or more than one Operation is selected.

  Calculate m when signals maximum p-p value raises

A 2-MHz carrier is modulated by a music signal that has frequency components from 20 Hz to 8 kHz. Determine the range of frequencies generated for the upper and lower sidebands of AM signal.

  Calculate the current at the transmitting end

A) If 220kV, 220 MVA with power factor 0.8 lagging is determined to be at the receiving end, calculate the voltage at the transmitting end. B) If 220kV, 220 MVA with power factor 0.8 lagging is determined to be at the receiving end

  What is the output voltage at 75 degrees

A potentiometer is wired to represent a range of 0 - 180 degrees. The potentiometer is supplied with a voltage of 15 Vdc. What is the output voltage at 75 degrees

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd