Does the current process appear to be in control

Assignment Help Operation Management

Reference no: EM132302911

Quality Control Analytics at Toyota

As part of the process for improving the quality of their cars, Toyota engineers have identified a potential improvement to the process that makes a washer that is used in the accelerator assembly. The tolerances on the thickness of the washer are fairly large since the fi t can be loose, but if it does happen to get too large, it can cause the accelerator to bind and create a potential problem for the driver. (Note: This part of the case has been fabricated for teaching purposes, and none of these data were obtained from Toyota.) Let’s assume that, as a fi st step to improving the process, a sample of 40 washers coming from the machine that produces the washers was taken and the thickness measured in millimeters.

The following table has the measurements from the sample:

1.9 2.0 1.9 1.8 2.2 1.7 2.0 1.9 1.7 1.8

1.8 2.2 2.1 2.2 1.9 1.8 2.1 1.6 1.8 1.6

2.1 2.4 2.2 2.1 2.1 2.0 1.8 1.7 1.9 1.9

2.1 2.1 2.4 1.7 2.2 2.0 1.6 2.0 2.1 2.2

Questions

1. If the specification is such that no washer should be greater than 2.4 millimeters, assuming that the thick-nesses are distributed normally, what fraction of the output is expected to be greater than this thickness?

2. If there are upper and lower specifications, where the upper thickness limit is 2.4 and the lower thick-ness limit is 1.4, what fraction of the output is expected to be out of tolerance?

3. What is the Cpk for the process?

4. What would be the Cpk for the process if it were centered between the specification limits (assume the process standard deviation is the same)?

5. What percentage of output would be expected to be out of tolerance if the process were centered?

6. Set up __ X - and range control charts for the current process. Assume the operators will take samples of 10 washers at a time.

7. Plot the data on your control charts. Does the cur-rent process appear to be in control?

8. If the process could be improved so that the standard deviation were only about .10 millimeter, what would be the best that could be expected with the processes relative to fraction defective?

Reference no: EM132302911

Questions Cloud

Important things to you during this negotiation process : What are the most important things to you during this negotiation process? In what ways would you be willing to settle?

What is its role in healthcare improvement : What is baseline healthcare data, and what is its role in healthcare improvement?

How will the end users respond to such announcements : Search "scholar.google" or your textbook. Discuss the issues organization's face with regards to the protection of its customer information. How might an.

Individual transition you made using concepts of ending : Reflect on an individual transition you made using the concepts of ending, neutral zone, and new beginning

Does the current process appear to be in control : Plot the data on your control charts. Does the current process appear to be in control?

Create the use case diagram for the library system : Create the use case diagram for the Library System. Create a class diagram for the Library System.

Creating the step-by-step it security policy : Create a step-by-step IT security policy for handling user accounts/rights for a student who is leaving prematurely (drops, is expelled, and so on).

Nonprofit of maintaining marketing orientation : Primary benefits to a nonprofit of maintaining a marketing orientation include all of the following except:

Summarize the highlights of discussion : Discuss 1 concept or skill you learned in your courses at UoNA and how you think it adds value to your current job with a workplace associate or your manager.

User Account

All Pages