Dissolved silica in river water can be determined by the

Reference no: EM13645342

Dissolved silica in river water can be determined by the formation of a green-yellow silicmolybdate complex and the comparison of its absorbance against a reference standard. In such an analysis, 50.0mLs of river water is treated by adding 1.0mL of concentrated hydrochloric acid, 2.0mLs of ammonium molybdate solution, and 1.5mLs of oxalic acid solution. After 2 minutes, the solution gave an absorbance of 0.366 measured at 410nm. When a silica standard containing 0.80mg/L was treated in the same manner, it gave an absorbance reading of 0.279 measured at the same wavelength. Assume that Beer-Lambert Law holds exactly for this determination.

What would have been the absorbance reading of the river water sample if the standard solution had been added to it?

Reference no: EM13645342

Questions Cloud

Label the 6 nodes consecutively a 10v battery is connected : six identical 1000 ohm resistors are arranged in series forming a hexagon. label the 6 nodes consecutively. a 10v

Molar absorbtivity data for the cobalt and nickel complexes : molar absorbtivity data for the cobalt and nickel complexes with 23-quinoxalinedithiol are epsilonco 36400 and

In a series r-l-c circuit the phase angle is 400 with the : in a series r-l-c circuit the phase angle is 40.0 with the source voltage leading the current. the reactance of the

What is the distribution and parameters of s what is the : a worker at disneyworld in orlando is assigned the task of getting 100 guests to complete a survey about their

Dissolved silica in river water can be determined by the : dissolved silica in river water can be determined by the formation of a green-yellow silicmolybdate complex and the

Dtermine a the rate of shaft work transfer in kw b the : a rigid chamber contains 100 kg of water at 500 kpa 100 c. a paddle wheel stirs the water at 1000 rpm with a torque of

If the time period in part b were cut in half what would be : the armature of a simple ac generator has 30 circular loops of wire each with a radius of 10 cm. it is rotated with a

Give the equation for the standard deviation of a random : give the equation for the standard deviation of a random variable x over an entire population with probability mass

What should be the concentration of the sodium thiosulfate : a 0.2200g sample of 99.35 pure copper wire is dissolved in concentrated nitric acid. after the addition of an excess of

User Account

All Pages