Disregard the glass and any other mass and find entropy

Reference no: EM13535666

1.When something is completely constrained you can solve for all reactions and moments, when something is partially or improperly constrained how do you know what you can solve for?

2.Argon in a light bulb is at 110kPa, 70 degrees celsius. The light is turned off, so the argon cools to the ambient 20 degrees celsius. Disregard the glass and any other mass and find the specific entropy generation.

3.Compute the cable tension at the midpoint, the quarterpoint, and support for a 1600 foot span with a sag at the midpoint of 100 feet, when the cable is loaded with 10 kips/foot spread uniformly along a horizontal line.

Reference no: EM13535666

Questions Cloud

What speed in mph is required : A steam locomotives had scoops installed that took water from a tank located between the tracks and lifted water into the tender. To lift the water 12 ft with a scoop, neglecting all losses, what speed in mph is required?

Determine the maximum value of dz if the flow is to remain : Water flows downhill through a 3 in. diameter steel pipe. The slope of the hill is such that for each mile (5280 ft) of horizontal distance, the change in elevation is Δz.

What is the specific volume of the mixture : Water are mixed with 150g of another fluid (density = 790 kg/m3 ). What is the specific volume of the mixture, assuming that the volumes are additive and the mixture is homogeneous?

Derive this equation from the basic material : Absolute value signs serve as a reminder that, at this point Td and Te must be expressed as absolute temperatures.

Disregard the glass and any other mass and find entropy : Argon in a light bulb is at 110kPa, 70 degrees celsius. The light is turned off, so the argon cools to the ambient 20 degrees celsius. Disregard the glass and any other mass and find the specific entropy generation.

What must the driver’s eye height in the van be for the : A 1200 ft. equal tangent crest vertical curve is currently designed for 50 mi/hr. A civil engineering student contends that 60 mph is safe in a van because of the higher driver’s eye height. If all other design inputs are standard, what must the driv..

What is the rate of entropy generation during this process : Liquid water is to be pumped by a 10-kW pump from 100 kPa at a rate 5 kg/s. What is the highest pressure the water can reach at the exit? Neglect the kinetic and potential energy change of the water. Take the specific volume of water as constant at 0..

Determine what would be the maximum possible percent : Engineers at the General Electric turbine division are trying to improve an existing adiabatic steam turbine that receives 100 kg/s superheated steam at 10 MPa and 800 oC and after expansion and producing power, the spent steam exits the turbine at 1..

What are the two conditions of the process that are required : What are the two conditions of the process that are required for an isentropic process defined in (a) to take place ? Prove your answers with second law equation for a control volume.

User Account

All Pages