Discuss the limitations of the monitoring approach

Assignment Help Civil Engineering
Reference no: EM13305087

A passive dosimeter is to be designed for use in obtaining monthly average concentrations of atrazine in a stretch of river. Typical concentrations range from 10 to 50 g/L. Atrazine, a herbicide commonly found in runoff from agricultural lands. The dosimeter will use activated carbon as the adsorbent. To maximize diffusion rate, the diffusion barrier adjacent to the activated carbon is to be a polycarbonate membrane filter that has pores with a nominal diameter of 1 ?m and a total surface area of pores that is estimated as 0.635 cm^2. The length of the diffusion channels is the thickness of the membrane (10 ?m). Tests have shown that atrazine adsorbs very strongly on activated carbon such that 2 g of activated carbon should be sufficient to ensure that the concentration remains close to zero at the surface of the activated carbon. Given the percent recovery of adsorbed atrazine (using a solvent extraction), the volume of solvent and the sensitivity of the analytical method (a gas chromatographic procedure), the minimum mass of atrazine accumulated by the activated carbon that is capable of detection is 10 ?g.

a). determine whether this dosimeter design will be adequate to detect atrazine given the sampling time and the typical concentration range mentioned above.

b). Discuss the limitations of this monitoring approach.

Reference no: EM13305087

Questions Cloud

Create the database that contains each of the relations : Find all Governors General of Australia who were Barons at the time of their appointment. List them by Title and name and date that they were appointed to the position. Order the list by ascending date of appointment.
Determine how many photons per second enter the eye : The threshold of dark-adapted (scotopic) vision is 4.0 multiplied by 10-11 W/m2 at a central wavelength of 500 nm. how many photons per second enter the eye
What is the sound level at that distance : The source of a sound wave has a power of 1.60 µW. Assume it is a point source. What is the sound level at that distance
Determine the type of water surface profile for depths : A 2.45 m wide rectangular channel has a bed slope of 0.0004 and Manning's roughness coefficient n of 0.015. For a discharge of 2.83 m^3/s, determine the type of water surface profile for depths of 1.52 m, 0.61 m, 0.30 m.
Discuss the limitations of the monitoring approach : A passive dosimeter is to be designed for use in obtaining monthly average concentrations of atrazine in a stretch of river. Typical concentrations range from 10 to 50 g/L. Atrazine, a herbicide commonly found in runoff from agricultural lands.
Find how many moles of water are contained in the glass : A cylindrical glass of water (H2O) has a radius of 3.96 cm, How many moles of water are contained in the glass
What is the net income annually for the plant : The depreciation of the plant is 50,000 per year. Assuming a corporate tax rate of 40%, what is the net income annually for the plant?
What is the amplitude of the air oscillations : A sound wave of frequency 400 Hz has an intensity of 2.00 µW/m2. What is the amplitude of the air oscillations
What will be share price if the stock splits five for four : Shares in Raven Products are selling for $75 per share. There are 1 million shares outstanding. What will be the share price in each of the following situations? Ignore taxes.

Reviews

Write a Review

Civil Engineering Questions & Answers

  Find the strain develope in the sample

a quartzite sample in a compression testing mechine is 180mm long and 54mm in diameter. what is the stress under a load of 100kN? if the modulus of elasticity is 102kN/mm2, find the strain develope in the sample.

  Express samples hardness in meq per l and mg per l of caco3

Hardness is sum of all divalent cations (meaning all species with a positive charge of 2) in a water sample. Magnesium (Mg2+) and calcium (Ca2+) are the most common divalent cations that contribute to hardness.

  Determine how long will generator run on a tankful of fuel

A Bonda portable generator is powering a small travelling fridge (120V) in your RV and consumes 125 watts. The efficiency of the generator's gas motor is 23% and the electrical portion (power head) is more efficient at 91%.

  Determine the net rate of flow of linear momentum

Determine the net rate of flow of linear momentum through the control surface.

  How much calcium bicarbonate will need to be added per day

How much calcium bicarbonate (kg/day) will need to be added per day in water with alkalinity of 30 mg/L CaCO3 to prevent rapid pH decrease (assume for simplicity inly bicarbonate alkalinity is present) if 794 kg of Al2(SO4)3 x 18H2O

  What are the factors affecting the hydraulic conductivity

what are the factors affecting the hydraulic conductivity?

  What runoff volume will show up in nearby stream to baseflow

If a watershed of drainage area 100 mi^2 has abstractions of 2.5 in/hr, what runoff volume will show up in the nearby stream in addition to baseflow for a rainfall of 5-hr duration with an intensity of 4 in/hr

  Find what are the monthly payments and the total interest

A 2014 Ford Mustand convertible in 'Gotta have it Green Metallic' is retailing for $38,000. If you put $3,500 down on the vehicle, and obtain approval for a 2.19% car loan compounded monthly for 5 years.

  Determine how much oil is recovered by the weight

A separator accepts waste oil at 70% oil and 30% water by weight. The top product stream is pure oil while the bottom underflow contains 10% oil. If a flow of 20 gal/min is fed to the tank, how much oil is recovered

  Describe the use of productivity models for estimating land

Describe the use of productivity models for estimating land productivity. Provide details about various attributes that can be used and how the model is developed . Examples can be used to demonstrate model workability.

  How many 34-inch diameter rivets are required to transmit

How many 34-inch diameter rivets are required to transmit 55,000 lb from the two angles to the gusset plate if the allowable shear stress in the rivets is 15,000 psi. Assume each rivet carries the same amount of load.

  How to draw the expected water table profile along the line

Compute the water table profile drawn in part B. Provide a detailed description of your methodology, and limit your solution to include only 4 image wells. Plot the profile, and provide drawdown amounts at X = -400 m, -200 m, -100 m, 100 m, 200 m,..

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd