Diaphyseal cross section carries a bending moment

Assignment Help Mechanical Engineering

Reference no: EM13713136

Assume that a diaphyseal cross section carries a bending moment M. Let the cross section be circular with inner and outer diameter of 20 and 30 mm, respectively, and assume that the neutral axis (NA) passes through the centroid. Draw the cross section and write an equation for the normal stress?, as function of angular position ? Measured from the neutral axis. Assume that modeling adds or removes bone on the periosteal and endosteal surfaces at a rate proportional to the local longitudinal stress on the surface: M_F/R = -K?(?) where the opposition rate M_F / R is negative for tensile stress and positive for compressive stress and the rate of constant K is the same for each kind of modeling and each surface.

(a) Sketch a line adjacent to the original periosteal surface that would represent the circumference after some arbitrary period of time.

(b) Do the same for the endosteal surface. (Scale your sketch so that the maximum thickness of bone added is about half the original cortical thickness.)

(3) What happened to the bone's cross-sectional geometry? Would this change be advantageous in some way?

Reference no: EM13713136

Questions Cloud

Load is needed to generate a transverse center displacement : What load is needed to generate a transverse center displacement of 5 mm for an aluminium beam of 15 cm length, 2 cm width and 2 mm thickness (in three-point bending). Determine what strain you expect at the bottom surface for this deflection for Al ..

Determine the tension in the cables de and bc : Determine the tension in the cables DE and BC and the components of reaction of the smooth collar at A. The sign weighs 75 lb.

Concerned about carbon content in steel : We are concerned about carbon content in steel. It has a direct effect on the yield and tensile strength of what is formed in what is called a hot rolled condition directly from the steel production facility. 1010 steel has yield strength of 180MPa, ..

Draw a cash-flow diagram : An amount P must be invested now to allow withdrawals of $1,000 per year for the next 15 years and to permit $300 to be withdrawn starting at the end of year 6 and continuing over the remainder of the 15-year period as the $300 increases by 6% per ye..

Diaphyseal cross section carries a bending moment : Assume that a diaphyseal cross section carries a bending moment M. Let the cross section be circular with inner and outer diameter of 20 and 30 mm, respectively, and assume that the neutral axis (NA) passes through the centroid. Draw the cross sectio..

Calculate the elastic modulus of this material : A cylindrical specimen of some metal alloy 8.7 mm in diameter is stressed in tension. A force of 1390 N produces an elastic reduction in specimen diameter of 0.0041 mm. Calculate the elastic modulus (in GPa) of this material if its Poisson's ratio is..

Calculate the thrust force developed by this engine : Air at 12 psia and 60F enters the jet engine of an aircraft flying at a velocity of 500 ft/s. Inlet area of the engine is 4 ft2. Exhaust gases leave the engine with a relative velocity of 900 ft/s. The fuel flow rate is only 2% of the mass flow rate ..

Calculate the blackbody hemispherical spectral intensity : Calculate the wavelength (?) in ?m for maximum blackbody hemispherical spectral emissive power (E,b) at T = 750, 1500, 3000, and 5777 K. Calculate the temperature of a blackbody if its maximum hemispherical spectral emissive power (E,b) corresponds t..

Change in magnetic properties when steel is heated : Describe the theory used for the IZOD test and what units are used to report toughness? Explain the change in magnetic properties when steel is heated. Is this due to allotropic properties?

User Account

All Pages