Diameter alloy rod has elongated-diameter has been reduced

Assignment Help Mechanical Engineering

Reference no: EM13704534

At the proportional limit, a 1.5-in. gage length of a 0.375-in.-diameter alloy rod has elongated 0.0081 in. and the diameter has been reduced 0.00071 in. The total tension force on the rod was 5.62 kips. Determine the following properties of the material:

a) The modulus of elasticity

b) Poisson’s ratio

c) The proportional limit

Reference no: EM13704534

Questions Cloud

Assuming constant specific heat at room temperature : A Stirling cycle operates with 1 kg of air between thermal energy reservoirs at 27oC and 527oC. The maximum cycle pressure is 2000 kPa and the minimum is 100 kPa. Assuming constant specific heat at room temperature,

Sheet of epoxy reinforced : A sheet of epoxy reinforced with 60% unidirectional E-glass fibers, where x is the fiber direction. Strains ex= 0.0030, ey=-0.0020, and yxy = .0025 are measured. Estimate the applied stress ox, oy, txy

Meteorologist uses pitot-static tube to measure wind speed : A meteorologist uses a pitot -static tube to measure the wind speed in a tornado. Based on the damage caused by the storm, the tornado is rated as EF5 on the enhanced Fujita Scale. This means that the wind speed is estimated to be in the range of 261..

What is the maximum rated engine speed : You are designing a 4-stroke cycle diesel engine to provide a brake power of 300 kW naturally aspirated at its maximum rated speed. Based on typical values for BMEP and mean piston speed, estimate the required engine displacement, and the bore and st..

Diameter alloy rod has elongated-diameter has been reduced : At the proportional limit, a 1.5-in. gage length of a 0.375-in.-diameter alloy rod has elongated 0.0081 in. and the diameter has been reduced 0.00071 in. The total tension force on the rod was 5.62 kips.

A hypothetical metal has hcp crystal structure with ideal : A hypothetical metal has an HCP crystal structure with the ideal c/a ratio (1.633). What is the volume of its unit cell, if the atomic radius is 1.3A?

Determine the tension in cable ac : The boom OA carries a load P and is supported by two cables as shown. Knowing that the tension in cable AB is 183 lb and that the resultant of the load P and of the forces exerted at A by the two cables must be directed along OA, determine the tensio..

Calculate the work done by the steam during this process : Five kilogram of saturated water vapor at 300 kPa is heated at constant pressure until its temperature reaches 200oC. Calculate the work done by the steam during this process.

Determine the value of the polar coordinates of the point : A particle moves along a spiral described by the equation r=r(inital)+kappa*theta, where r(inital) and kappa are constants, and where theta is in radians. Assume that theta dot =alpha*time, where alpha= 0.15rad/s^2 and t is time expressed in seconds.

User Account

All Pages