Developed power cycle operating between hot-cold reservoirs

Assignment Help Mechanical Engineering

Reference no: EM13718078

An inventor claims to have developed a power cycle operating between hot and cold reservoirs at 1175K and 295K, respectively, that provides a steady state power output of (a) 28 kw, (b) 31.2 kW, while receiving energy by heat transfer from the hot reservoir at the rate 150000kJ/h. evaluate each claim.

Reference no: EM13718078

Questions Cloud

Volume rate of flow and time required to fill mold cavity : A mold has a downsprue of length = 6.0 in. The cross-sectional area at the bottom of the sprue is 0.45 in2. The sprue leads into a horizontal runner which feeds the mold cavity, whose volume = 75 in3. Determine (a) the velocity of the molten metal fl..

Determine how long it will take for the casting to solidify : In the casting of steel under certain mold conditions, the mold constant in Chvorinov's Rule is known to be 4.0 min/cm2, based on previous experience. The casting is a flat plate whose length = 35 cm, width = 10 cm, and thickness = 15 mm. Determine h..

Outputs voltage that is linearly proportional to temperature : A temperature measuring device with a time constant of 0.15 s outputs a voltage that is linearly proportional to temperature. The device is used to measure an input signal of the form T(t) = 115 + 12 sin 2t, in Â°C.

Write a brief description of the logistical process : Write a brief description of the logistical process you would like to improve. Describe the change you would like to make.

Developed power cycle operating between hot-cold reservoirs : An inventor claims to have developed a power cycle operating between hot and cold reservoirs at 1175K and 295K, respectively, that provides a steady state power output of (a) 28 kw, (b) 31.2 kW, while receiving energy by heat transfer from the hot re..

What is the approximate volume of each of your body : 1. What is the approximate volume of each of your body fluid compartments? 2. Which routes of water gain and loss from the body are regulated? 3. How do angiotensin II, aldosterone, atrial natriuretic peptide, and antidiuretic hormone regulate the ..

Buoyancy force-newtons tending to lift core during pouring : A 92% aluminium 8% copper alloy casting is made in a sand mold using a sand core that weighs 20 kg. Determine the buoyancy force (use the books definition) in Newtons tending to lift the core during pouring. (Hints: Sand density = 1.6 g/cm3)

What is odontology : Explain in detail how the following will be used in facial reconstruction: Odontology What is odontology? How is this process used in facial reconstruction?

Recognize the elements and correct use of thesis statement : Recognize the elements and correct use of a thesis statement - Write a research proposal that states the claim and scope of the research project.

User Account

All Pages