Develop the equations for the solution q v and y as follows

Assignment Help Mechanical Engineering
Reference no: EM13639201

Develop algorithms for the explicit solution of the Kinematic Equations when applied to a problem of runoff from a plane surface subject to a steady rate of rainfall excess. Use forward differences in the time (t) direction and backward differences in the x direction.

The initial and boundary conditions are:

- Initial condition (t=0): q=0 and y=0 for all x

- Upstream boundary (x=0): q=0 for all t

- Downstream boundary (x=L): So=Sf

Develop the equations for the solution q, v, and y as follows:

(a) At the downstream boundary using backward differences for the spatially variant terms.

(b) At time zero and any x using forward differences for the time variant terms.

Reference no: EM13639201

Questions Cloud

Hospital x-ray generators emit x rays with wavelength of : hospital x-ray generators emit x rays with wavelength of about 15.0 nanometers nm where 1nm109-m. what is the energy of
A charge of 585 microc resides at the origin a what is the : a charge of 5.85 microc resides at the origin. a what is the flux through any gaussian surface enclosing this charge? b
Determine the water convection heat transfer coefficient : the upper surface of a 50-cm thick solid plate k237 wmk is being cooled by water with temperature of 20 degrees
In that region it travels a horizontal distance of 225 cm : an electron with an initial horizontal velocity of magnitude 0.95 multiplied by 109 cms travels into the region between
Develop the equations for the solution q v and y as follows : develop algorithms for the explicit solution of the kinematic equations when applied to a problem of runoff from a
Construct the 98 confidence interval for the proportion of : use the one-proportion z-interval procedure to find the required confidence interval. a survey of 300 union members in
Obtain a sample size that will ensure a margin of error of : for the given margin of error and confidence level determine the sample size required. a researcher wants to determine
Sales management your response should be at least 350 words : your response should be at least 350 words in length. please use my course book only all sources used including the
If the shot is made from a horizontal distance of 1100 m : a basketball leaves a players hands at a height of 2.25 m above the floor. the basket is 3.05 m above the floor. the

Reviews

Write a Review

Mechanical Engineering Questions & Answers

  What is most nearly the amount of work done to overcome

a block of mass 100 kg is sliding across a rough flat surface with coefficient of friction mu 0.6 between the block and

  A spherical hot-air balloon is initially filled with air at

a spherical hot-air balloon is initially filled with air at 120 kpa and 35oc with an initial diameter of 3 m. air

  A piston-cylinder device initially contains 035-kg of steam

a piston-cylinder device initially contains 0.35-kg of steam at 3.5 mpa superheated by 7.4degc. now the steam loses

  What is the maximum possible power per unit mass flow rate

the elevation change available at the grand coulee dam is 330 feet. what is the maximum possible power per unit mass

  Argon gas initially at 1 bar 100 k undergoes a polytropic

argon gas initially at 1 bar 100 k undergoes a polytropic process with n k to a final pressure of 15.59 bar. the work

  Suppose further that during the deformation the internal

consider a sample of pure nickel in the shape of a coin. the area of the flat face is 1 cm2 and the initial thickness

  A cyclic steam power plant is to be designed for a steam

a cyclic steam power plant is to be designed for a steam temperature at turbine inlet of 360 celsius and an exhaust

  The prevailing wind velocity is 50 kmh the atmosphere is in

a 200-m-high 4-m-diameter stack emits 1000 kgs of 100 degree c gases into 5 degree c air. the prevailing wind velocity

  After your calculations explain two practical strategies

calculate the cost per piece of a milling operation that is used to machine a pocket of 2x3x0.5 lxwxd. the material

  1 a solid cube of copper with each side 10 ft is

1. a solid cube of copper with each side 1.0 ft is converted into metallic powders of spherical shape by water

  If the ambient temperature is 10 oc determine the rate of

on an oil tanker saturated steam at 44 bar is supplied to deck auxiliaries through a steel pipe of 124 mm bore and 18

  Calculate the force required in direct extrusion of 1100-o

calculate the force required in direct extrusion of 1100-o aluminum from a diameternbspof 6 in. to 2 in. assume that

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd