Develop signal conditioning and error detection

Assignment Help Electrical Engineering

Reference no: EM131393056

A sensor measures pressure as 22 mV/psi. Develop signal conditioning, error detection, and a PI controller for the following specifications: 0-300-psi measurement range; setpoint adjustable from 100 to 200 psi; K,, adjustable from 1.5 to 5.0; K1 switchable between 0.8, 1.6, 2.4, and 3.2 min-; output range of 0 to 10 V.

Reference no: EM131393056

Questions Cloud

Design a two position digital controller : Design a two-position digital controller using the force transducer of given Problem. The output should go high at 500 N, and the dead band should be 75 N.

Find guess value at which the convergence switches roots : Determine the guess value at which the convergence switches roots. Explain this root-switching phenomenon based on your observations from this exercise.

Positive economic statement : Economists reason that the optimal decision is to continue any activity up to the point where the. Economics does not study correct or incorrect behaviors but rather it assumes that economic agents behave ________, meaning they make the best decision..

Design a two alarm system turning on one led : A type-J TC with a reference monitors a process temperature. Design a two alarm system turning on one LED at 100°C and another at 150°C.

Develop signal conditioning and error detection : Develop signal conditioning, error detection, and a PI controller for the following specifications: 0-300-psi measurement range; setpoint adjustable from 100 to 200 psi; K,, adjustable from 1.5 to 5.0; K1 switchable between 0.8, 1.6, 2.4, and 3.2 ..

Evaluate corporations international business-level strategy : For the corporation that operates internationally, briefly evaluate its international business-level strategy and international corporate-level strategy and make recommendations for improvement.

Design a proportional controller : Design a proportional controller for a 4- to 20-mA, ground-based input, a 0- to 9-V output, zero-error output adjustable from 0 to 100%, and K4, adjustable from 1 to 10. Design so the setpoint can be selected in the range of 4 to 20 mA.

Design a linkage to carry the body : Design a linkage to carry the body in Figure P5-l through the two positions P2 and P3 at the angles shown in the figure. Use analytical synthesis without regard for the fixed pivots shown.

Design a three mode controller : A liquid-level system converts a 4-10-m level into a 4- to 20-mA current. Design a three-mode controller that outputs 0-5 V with a 50% PB, 0.03-min reset time, and 0.05-min derivative time.

User Account

All Pages