Already have an account? Get multiple benefits of using own account!
Login in your account..!
Remember me
Don't have an account? Create your account in less than a minutes,
Forgot password? how can I recover my password now!
Enter right registered email to receive password!
A 5 ft square, 2 ft. deep spread footing is subjected to a concentric vertical load of 60 k and an overturning moment of 30 ft-k. that acts at a 45 degree angle from the side of the footing (it acts diagonally across the top of the footing) determine whether the resultant force acts within the kern. If it does, then compute the bearing pressure at each corner of the footing.
What is the Hydraulic Radius of Trapezoidal channel that has a bottom width of 9 feet, side slopes 3:1 (H:V) and the flow depth is 6 feet.
consider the unsteady flow of a fluid in the x direction through a control volume. the linear momentum of the fluid
A tank of Compressed oxygen for flame cutting is to contain 10 kg of oxygen at a preassure of 14 MPA ( the temperature is 20 degrees Celsius). How large must be the tank volume
A tank with a volume of 5,000 gal contains salt solution at an initial concentration (C0*) of 70,000 mg/L, but the concentration in the tank (C) needs to be reduced to 500 mg/L. Two approaches are being considered
groundwater is pumped for domestic use from an unconfined aquifer. the thickness of the clay is 40%. after 10 years of pumping, the porosity is reduced to 30%. determine the subsidence of the clay surface.
Outflow of water occurs from a cylindrical tank with a hole at the bottom. Find the height of the water in the tank at any time if the tank has a diameter 2 m, the hole has diameter 1 cm, and the initial height of the water when the hole is opened..
A plate 6 inch wide and 1/2 inch thick is lapped over and welded to a gusset plate. determine the minimum length of a 5/16 inch, side fillet weld that will be necessary if the plate is subjected to an axial stress of 20 ksi
The specific storage of a 45-m thick confined aquifer is 3.0 X 10^-5 m^-1. How much water would the aquifer produce if the piezometric surface is lowered by 10 m over an area of 1 km^2
determine the minimum length of a 5/16 inch, side fillet weld that will be necessary if the plate is subjected to an axial stress of 20 ksi . use an allowable shearing stress through the throat of the weld of 21 ksi.
a simply supported beam with a span of 8m is to carry, in addition to its weight, a superimposed dead load of 18kN/m and a live load of 30kN/m both over the entire span.
A distance is measured with an EDM having the instrument /reflector offset constant set to 0mm. The slope distance is reported as 2435.672 m with a zenith angle reading of 90 degrees 34 minutes and 05 seconds.
1.what would the bc ratio be if the light poles were twice as far apart as assumed above?2. what is the ratio of night
Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!
whatsapp: +1-415-670-9521
Phone: +1-415-670-9521
Email: [email protected]
All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd