Determine whatpressure head is needed from the pump

Assignment Help Civil Engineering

Reference no: EM13532272

A WTP Operator is trying to size a pump that takes water from a WTPholding tank and sends it to a house on a hill above theplant. The operator's goal is to have 60 psi of waterpressure entering the house. The operator knows thatthe head loss (major+minor) from the holding reservoir to the pumpis three times the velocity head in the 8 inch diameter pipe, andthe head loss from the pump to the house is seen times the velocityhead of the pipe. If the pressure head at the inlet of thepump is -8ft and the velocity head entering the house is the sameas the velocity head in the pipe at the pump, determine whatpressure head is needed from the pump to achieve the operator'sgoal of 60 psi of water pressure. (hint: notice the velocityhead at the house is the same as the velocity head in the pipe atthe pump

Reference no: EM13532272

Questions Cloud

Determine the height from the ground and the time at which : a two story school has interior columns that are spaced 15 ft apartin two perpendicular directions. If the loading on the flat roof isestimated to be 20 lb/ft^2 determine the reduced live loadsupported by a typical interior column at (a) the ground f..

Determine the percent reduction in the required force when : A 50 cm by 20 cm block weighing 150 N is to be moved at aconstant velocity of .8m/s on an inclined surface of 20 degreesfrom horizontal with a friction coefficient of .25.

Determine the reduction of capillary rise if the contact : Determine the reduction of capillary rise if the contact angle representing the adhesion between water and soilmaterial is increased from 30 degrees to 60degrees.

Determine the magnitudes of the other forces : A welded connection is in equilibrium under the action of thefour forces shown. Knowing that Fa=8kn and Fb= 16kN, determine the magnitudes of the other forces.

Determine whatpressure head is needed from the pump : A WTP Operator is trying to size a pump that takes water from a WTPholding tank and sends it to a house on a hill above theplant. The operator's goal is to have 60 psi of waterpressure entering the house. The operator knows that the head loss (major+..

Determine the tension in the support cable : A sailor is being rescued using a boatswain's chair that issuspended from a pulley that can roll freely on the support cableACB amd is pulled at a constant speed by cablle CD

Determine the intensity w of the maximum distributed load : 1.102 Determine the intensity w of the maximum distributed load that can be supported by the hanger assembly so that an allowable shear stress of τallow = 13.5 ksi is not exceeded in the 0.40-in.-diameter bolts at A and B

Find the load bearing strength of a support beam : Looking a wood (pine) deck material. It's a simple 8' by 8' deck. There's a support beam holding up this deck. Other end is connected to building.

Concrete pier is loaded on top with a uniformly : Concrete pier is loaded on top with a uniformly distributed load of600 lbs per square foot. Investigate the state of stressat a level of 4 ft. above the base.

User Account

All Pages