Determine what would the deflection be at the right end

Assignment Help Civil Engineering
Reference no: EM13313944

A 2-inch by 2-inch solid steel beam (18 inches long) is fixed to the wall at the left to resist applied moment (20,000 lbs-inch). What would the deflection be at the right end? Up or down?

Reference no: EM13313944

Questions Cloud

Determine what is the maximum shear stress : A steel tube has an outside diameter of 2.5 inches and an inside diameter of 2.375 (1/8" thick). If it transmits 35 hp when turning at 2700 rpm, what is the maximum shear stress
Explain the solution and allowed to dissolve : A sample of 0.05567 mole sodium acetate was dissolved into 150.0 mL of water. If 2.00g of NaOH(s) was added to the solution and allowed to dissolve
Discuss your company of expertise : Discuss your Company Of Expertise
How many excited states are there : Use the semi-infinite-well potential to model a deuteron, a nucleus consisting of a neutron and a proton. How many excited states are there
Determine what would the deflection be at the right end : A 2-inch by 2-inch solid steel beam (18 inches long) is fixed to the wall at the left to resist applied moment (20,000 lbs-inch). What would the deflection be at the right end Up or down
Differentiating characteristics of projects from routine : Define key deliverables and workflow, along with roles/responsibilities for their realization and work out a benefits realization strategy for post-project confirmation that benefits are being accrued
Determine the maximum force that can safely applied : Determine the maximum force (P) that can safely applied to a steel tee section (20 feet in length) with the point loads at 5 feet from each end. Fixed at one end, pin at the other.
At what speed will the crewman hit the bottom of the ravine : If we assume the ice is perfectly slick (that is, no friction between the crewman and the ice once he slips and falls down), At what speed will the crewman hit the bottom of the ravine
Define a function named average grade : Define a function named average grade. This function returns a double and has four double arguments, testi, test2, test3, test4. The return value should be the average, or arithmetic mean of the four arguments.

Reviews

Write a Review

Civil Engineering Questions & Answers

  Determine how much soil must be removed from the site

The minimum safe side slope for an excavation in a certain type of soil is 3 horizontal to 1 vertical. If a foundation excavation must be 40 ft wide x 60 ft long x 20 ft deep, How much soil must be removed from the site

  Provide cash flow diagram to get a basic fridge

Mark's refrigerator has just died. He can get a basic fridge or a more efficient fridge with an Energy Star designation. Mark wants to consider a 10 year planning horizon using an interest rate of 5%.

  Discuss the limitations of the monitoring approach

A passive dosimeter is to be designed for use in obtaining monthly average concentrations of atrazine in a stretch of river. Typical concentrations range from 10 to 50 g/L. Atrazine, a herbicide commonly found in runoff from agricultural lands.

  Determine what is the equivalent pf rate constant

For a substance that decays according to first-order kinetics, what is the equivalent PF rate constant that would be used to describe treatment in a series of three CM reactors in terms of flow (Q), the total volume in the system (V),

  Find what is the upward acceleration starting from rest

An elevator weigh 4000kg. When the upward tension in the supporting cable is 48000N what is the upward acceleration Starting from rest, how far does it rise in 3s

  Determine the forces acting on the bracket at point c

The L bracket shown below is pinned to the ground at point C and attached to a single cable at points A and D that wraps around a frictionless pulley at point B. Determine the forces acting on the bracket at point C and then tension in the cable.

  Find probability that a radndomly selected thermometer reads

assume the readings on thermometers are normally distibuted with a mean of 0C and a standard feviation of 1.00C. Find the probability that a radndomly selected thermometer reads greater than 1.23 and draw a sketch of the region.

  What should be the design capacity of the distribution pipes

A water supply system is being designed to serve a population of 200,000 people with an average per-capita demand of 600L/Person-day (peak demand factor is 1.8) and a needed fire flow of 28,000 L/min.

  What is the water depth 300 m upstream from the outfall

A horizontal rectangular concrete channel terminates in a free outfall. The channel is 4m wide and carries a discharge of water 12 cms. What is the water depth 300 m upstream from the outfall

  Determine is there any runoff from the area during the storm

During a 5 hour storm event, the precipitation over a 230-acre area is 1.5niches. There is constant infiltration at a rate of 0.12 inches/hour and the depession storage is 17 acre-ft. Is there any runoff from the area during the storm

  Determine the range from the sv to the rec in gps

determine the range from the SV to the REC in GPS; using codes C/A and P and also waves (L1 and L2). How does two of the below from the list have an effect on the codes and waves

  Calculate the ph of the solution

A 1.50 L buffer solution is 0.250 M in HF and 0.250 M in NaF. Calculate the pH of the solution after the addition of 0.0500 moles of solid NaOH. Assume no volume change upon the addition of base. The Ka for HF is 3.5 x 10-4.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd