Determine what would be the co concentration in the box

Assignment Help Civil Engineering
Reference no: EM13312549

GIVEN: A simple way to model air pollution over a city is with a box model that assumes complete mixing and limited capability for the pollution to disperse horizontally or vertically except in the direction of the prevailing winds (for example, a town located in a valley with an inversion layer above it). Consider a town having an inversion at 250 m, a 20-km horizontal distance perpendicular to the wind, a windspeed of 2 m/s, and a carbon monoxide (CO) emission rate of 60 kg/s (see Figure P1.16 on pg. 43 of the text). Assume the CO is conservative and completely mixed in the box.

FIND: What would be the CO concentration in the box?

Reference no: EM13312549

Questions Cloud

Estimate the moisture content and moist density : A 0.4m^3 moist soil sample has the following: Moist mass = 711.2 kg, Dry mass 623.9 kg, Specific gravity of soil solids = 2.68 Estimate: a). Moisture content. b). Moist density.
Explain total ion concentration : If 0.015 M NaCl shows conductivity of 12,000 units, based on "total ion concentration" what conductivity should be observed for 0.015 M K2SO4
What is the speed of the wind : A small airplane flies with a speed relative to the ground (ground speed) of 212.0 km/h in a direction 19.0 degrees to the east of north. what is the speed of the wind
Capstone project : Capstone Project
Determine what would be the co concentration in the box : A simple way to model air pollution over a city is with a box model that assumes complete mixing and limited capability for the pollution to disperse horizontally or vertically except in the direction of the prevailing winds
Description of the chosen company including location : Literature review covering the theoretical background and concepts, the topic of the paper, research on the country/organization especially including content from peer-reviewed research articles. Concepts such as entry mode, risks, potential for rewa..
Calculate the carbon concentration in steps into the depth : If the steel is decarburized in vacuum at 1000 C for one hour, calculate the carbon concentration in steps of 0.2 mm as you go into the depth of the steel (starting with x=0 at the surface) until you reach the overall concentration of 0.3 wt % car..
What is the temperature of the liquid : The length of the mercury column at the ice point and steam point are 5.0 cm and 40.0cm respectively. What is the temperature of the liquid
Determine which process requires more energy at atm pressure : Which process requires more energy: completely vaporizing 1 kg of saturated liquid water at 1 atm pressure or completely vaporizing 1 kg of saturated liquid water at 8 atm pressure

Reviews

Write a Review

Civil Engineering Questions & Answers

  What is the risk of constructing a harbor

What is the risk of constructing a harbor which will be unprotected from wave attack during its construction.

  What pressure in mpa must be applied to water to reduce

At 25 C, approximately what pressure in MPa must be applied to water to reduce its volume by 2%

  Determine the design flow for the conduit

An intake conduit from a well field used to pump ground water is being designed for a town with a population of 23,000 people. Six years ago the population was 21,500 people. a) assuming deometric growth, calculate the population in 50 years

  Determine the optimal amount of space rays and zappers

Galaxy Industries is a manufacturing company that produces two toy doll models: the Space Ray and the Zapper. The Space Ray can be sold for a profit of $8/dozen and a profit of $5 can be made if a dozen of Zappers are sold.

  Total mass-quality of steam-specific volume

Find the total mass, quality of steam, specific volume, specific enthalpy, and specific internal energy.

  Determine the acceleration a of the plate on the bar

The bar is prevented from rotating by the two pegsA and B fixed to the plate. Determine the acceleration a of the plate for which no force is exerted on the bar by either peg A or B.

  Determine the mass and specific volume of argon gas

Determine the mass and specific volume of argon gas in a vessel at 150 kPa and 20°C. The vessel is spherical, with radius 5 m.^5

  Determine what is the hydraulic conductivity of the sand

it was observed that the quantity of the water flowing through the sand layer into the collection ditch is 250 m^3/day. What is the hydraulic conductivity of the sand (k)

  Determine the hydraulic conductivity of the aquifer

Drawdown at a 0.20 m diameter, fully penetrating well, which has been pumping at the rate of 1000 m^3/day for a long enough time that steady state conditions have been reached, is determined to be 0.70 m.

  How high will the stream of water rise above the syringe

A syringe is pointed vertically up in the air and a force of 5 lbs is applied to the plunger with a diameter of 0.5 inches. Assuming no losses in the system how high will the stream of water rise above the syringe

  Determine what is the force in the wire and beam

The 5-m long cantilever beam using a W410 x 67 standard wide flange section has a distributed load of 1200 N/m placed on it. It is also supported by a cable at B, of length 2 m with a 7 mm2 cross sectional area. What is the force in the wire

  What should be the design capacity of the distribution pipes

A water supply system is being designed to serve a population of 200,000 people with an average per-capita demand of 600L/Person-day (peak demand factor is 1.8) and a needed fire flow of 28,000 L/min.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd