Determine what should the velocity for the model be

Reference no: EM13312106

A model is to be produced for a prototype with reynolds number similitude. The prototype and model will both be in air, if the prototype has a velocity of 500 ft/s and a diameter of 30 ft, what should the velocity for the model be if the model diameter is 2 ft?

Reference no: EM13312106

Questions Cloud

What is the current draw of the motor during the operation : The motor has an efficiency of 80%. It operates at 240V AC. A 12" diameter drum is attached to the gearbox output shaft, and a wire rope is wrapped around the drum to act as a winch. The winch is used to raise bucket of raw material in a factory.

Determine what is the new flowrate of the channel : The flowrate through an open channel with a slope of 2 % is calculated using Manning's equation at 100 cubic feet per second. If the slope of the channel is doubled to 4%

Introduction and background of your ce : Introduction and background of your CE

What is the maximum angle through which it may be scattered : When an x-ray photon with wavelength = 0.070nm strikes an electron at rest, What is the maximum angle through which it may be scattered

Determine what should the velocity for the model be : The prototype and model will both be in air, if the prototype has a velocity of 500 ft/s and a diameter of 30 ft, what should the velocity for the model be if the model diameter is 2 ft

Calculate the temperature of the steam at the exhaust : Consider a steam turbine in which the steam expands adiabatically. If the turbine consumes 1.00 kg steam each second, calculate the temperature of the steam at the exhaust

How high will the stream of water rise above the syringe : A syringe is pointed vertically up in the air and a force of 5 lbs is applied to the plunger with a diameter of 0.5 inches. Assuming no losses in the system how high will the stream of water rise above the syringe

What is the drift speed of the conduction electrons : A current of 3.50 A is carried by a copper wire of radius 0.87 mm. what is the drift speed of the conduction electrons

Determine the cycle length and distributuion of green : A simple four-leg intersection needs a 2-phase fixed-time signal. The critical flows in the N-S and E-w directions are 600 and 400 veh/hr, respectively, with a 0.95 peak-hour factor.

User Account

All Pages