Determine what is the rate of flow into the reservoir

Reference no: EM13298798

Runoff from a storm flows into a reservoir with a surface area of 20.0 ha at a constant rate. The reservoir level is observed to rise at 1 mm per minute when water is being released through the dam at a rate of 10 m3 per second. What is The rate of flow into the reservoir.

Reference no: EM13298798

Questions Cloud

Associated with selyean stress : Which of the following response is not associated with Selyean stress?

What would be failure deviatoric stress sigma1-sigma3 stress : The effective angle of friction (phi) was found to be 26 degrees for a normally consolidated soil. If the soil is tested in consolidated drained triaxial test under sigma3 = 60 kPa, what would be the failure deviatoric stress sigma1-sigma3 stress

Find over what distance must the lens be movable : To focus a camera on objects at different distances, the converging lens is moved toward or away from the film, Over what distance must the lens be movable

Evaluate the percentage of each conformer at equilibrium : The energy difference of 3.8 kJ/mol between gauche and anti butane corresponds to an equilibrium constant, Keq, of approximately 1.9. Calculate the percentage of each conformer at equilibrium.

Determine what is the rate of flow into the reservoir : Runoff from a storm flows into a reservoir with a surface area of 20.0 ha at a constant rate. The reservoir level is observed to rise at 1 mm per minute when water is being released through the dam at a rate of 10 m3 per second.

Find the peak value of the current supplied by the generator : An 9.2 mH inductor is connected to an ac generator (10.0 V rms, 650 Hz). Determine the peak value of the current supplied by the generator

Describe the political climate : Describe the political climate in your chosen country. Does your country’s leadership demonstrate a credible commitment to health services?

Determine what is the angular velocity and acceleration : a belt sander is being brought up to operating speed at the instant of the belt is rotating in the clockwise direction ar 4 ft/s and acceleration at 40 ft/s. the tensioning cylinders A and B have a radius of 2.5 in.

Determine the power input to the motor : A hoist motor supplied by a 240 V source requires 12 A to lift an 800 kg load at a rate of 9.00 m/min. Determine the power input to the motor

User Account

All Pages