Determine what is the probability of false alarm

Assignment Help Electrical Engineering

Reference no: EM13247861

A spread-spectrum acquisition system uses a serial search scheme.The synchroniser integrates the squarer output for interval of 0.1s and the synchroniser output is sampled at intervals of 0.05s . The probability of false alarm is 0.064255 . Given that the recieved SNR is 3.5dB,calculate the probability of detection.

Reference no: EM13247861

Questions Cloud

This job can also be done by a janitorial associate : Purchasing has identified a company that will pick up the damaged and unusable pallets and process them into wood chips, which this company then sells. The cost of this service is $1.25 per pallet.

What is the power factor of the circuit : In a series R-L-C circuit, R = 280? , XC = 240?and XL = 600? . The average power consumed in the resistor is 60.0W, What is the power factor of the circuit

Calculate voltage regulation and efficiency of the line : A 3-phase transmission line series load of 2000MVA, .8 p.f. lag at 735 kv. The ABCD parameters of the line are : A = .8746 =D, B = j128.33â„¦, C = j.0018315 (s). Calculate Vs, Is, voltage regulation and efficiency of the line.

Analyze the basis for the trends in consumption patterns : Considering the correlation of a company to the economy which would you chose: A company positively, negatively, or not correlated?

Determine what is the probability of false alarm : A spread-spectrum acquisition system uses a serial search scheme.The synchroniser integrates the squarer output for interval of 0.1s and the synchroniser output is sampled at intervals of 0.05s . The probability of false alarm is 0.064255 .

Determine a three-tap adaptive linear equalizer : assume single pulse of ampltude (+1) transmitted through a band-limited noise free channel.The sampled output of the reciever filter is y y= [0.32 0.98 0.25] Determine a three-tap adaptive linear equalizer when the recieved power is 0.15W.

Determine the transfer function for first order high filter : Determine the transfer function for a first order HIGH filter with a cutoff frequency of 1000 radians per second and passband gain of 1 using Chebyshev type with 1-dB ripples on the passband.

Determine the transfer function for a first order filter : Determine the transfer function for a first order low pass filter with a cutoff frequency of 1000 radians per second and passband gain of 1 using Chebyshev type with 1-dB ripples on the passband.

Determine the transfer function for a second order filter : Determine the transfer function for a second order band pass filter with following specifications. Chebyschev type with 1 db ripple in the pass band Lower cutoff frequency = 100 radians/sec

User Account

All Pages