Determine what is the normal stress at the fixed support

Assignment Help Civil Engineering
Reference no: EM13305974

The rod has a uniform cross-section of 53mm2. The external load consists of point loads: two P1 of 3kN, two P2 of 1kN, and one P3 of 7kN. What is the normal stress at the fixed support? Ignore the weight of the rod.

Reference no: EM13305974

Questions Cloud

Find the wavelength of the light passing through the slits : In a two-slit experiment, the slit separation is 3.00 Ã- 10-5 m. The interference pattern is recorded on a flat screen-like detector that is 2.00 m away from the slits.
What level of sales could walter industries have : What level of sales could Walter Industries have obtained if it had been operating at full capacity?
What is the angular rotation rate after front wheel contacts : A car is traveling toward a 20 degree slope at 60 mph. The wheels have a radius of 12 in, and the car's wheelbase is 100 in. What is the angular rotation rate of the car immediately after the front wheel contacts the slope
What is the unlevered value of the project : Suppose Lucent Technologies has an equity costof capital of 10%, market capitalization of $10.8 billion, and anenterprise value of $14.4 billion. Suppose Lucent's debt cost of capital is 6.1% and its marginal tax rate is 35%.
Determine what is the normal stress at the fixed support : The rod has a uniform cross-section of 53mm2. The external load consists of point loads: two P1 of 3kN, two P2 of 1kN, and one P3 of 7kN. What is the normal stress at the fixed support
Determine the wavelength of the resulting wave on the cable : A steel cable with a total length of 22.6 m and total mass of 68 kg is connected to two poles. Calculate the wavelength of the resulting wave on the cable
Find the total energy of the radiation : In proton-antiproton annihilation, a proton and an antiproton (a negatively charged particle with the mass of a proton) collide and disappear, producing electromagnetic radiation, Find the total energy of the radiation
Determine the speed of the car when time t is given : The 1.2-Mg mine car is being pulled by winch M mounted on the car. If the winch generates a constant power output of 30 kW, and the car starts from rest, determine the speed of the car when t = 5s.
Should the new equipment be purchased to replace the old : The firm has a 36 percent tax rate and a 9 percent cost of capital. Should the new equipment be purchased to replace the old?

Reviews

Write a Review

Civil Engineering Questions & Answers

  Determine the maximum number of large trucks and buses

The traffic stream consists of cars, buses, and large trucks (no recreational vechicles). A weekday directional peak-hour volume of 1800 vehicles (familar users) is observed, with 700 arriving in the most congested 15 min period.

  Calculate pump power equired to operate the heat exchanger

The heat exchanger consists of 12 m of copper tubing that is 2 cm in diameter with 19 return bends. The flow rate is 3 x 10-4 m3/s. Water enters at 20 C and exits at 80 C. The elevation difference between the entrance and the exit is 0.8 m.

  Find the steel area required for beam

Find the steel area required for beam which has b = 10 in. and d = 17.5 in. to carry a factored load moment of 1,600 in-kips.

  Determining equivalency factor of single axle

The weights on the same axles when the truck is empty and leaving the power plant are 10 kips, 12 kips, and 8 kips, respectively. A two lane road is to be designed to serve the power plant and to last for a period of 10 years. a) What is the equiv..

  At what flow rate should the farmer pump the water

A farmer wants to irrigate a piece of land in 15 hrs. The area of the field is 15 acres. the farmer grows alfalfa that requires 3.5 inches of water during the 15 hours.At what flow rate should the farmer pump the water

  Determine what is the maximum daily mass of chloride

The pipe has a flow of 5 m3/s. The stream's chloride concentration just upstream of the pipe's dischage is 12 mg/L, and the runoff pipe's discharge has a chloride concentration of 40 mg/L. Chloride is a conservative substance.

  How long would it take for the sled to reach at end of track

In 2003 at Holloman Air Force Base in New Mexico, test engineers set a world record by moving 192 lb payload at 6,453 miles per hour in a rocket sled. The rocket sled track, built in 1954, is 15.44 km in length.

  Find the horsepower added for the flow through the system

Find the horsepower added if the flow through the system is 400 m^3/s. The entrace is sharp, the two bends are equivalent to smooth 90 degree bends with R=1 ft, and there are two fully open gate valves

  What is the finished grade elevation on the curve at station

A sag vertical curve along an existing vertical alignment begins at station 23+45 and ends at station 30+25. The initial grade coming into the curve is -2% and the grade out is +5%. What is the finished grade elevation on the curve at station

  Explain break even stripping ratio

Break Even Stripping Ratio (BESR), Given an underground total mining cost of $8.85 per tonne, surface mining costs of $2.95 per tonne of ore, and surface mining stripping costs of $1.75 per tonne of waste

  Which will cause reaction at the bearing to be equal to zero

Determine the magnitude of which will cause the reaction at the bearing to be equal to zero. The bearings are in proper alignment and exert only force reactions on the rod. Set = 600 .

  Determine reaction components that ball exert on rod abc

The smooth surface that provides the support at C lies in the y-z plane. Determine the reaction components that the ball and socket exert on rod ABC, the tension in cable BD, and force the smooth wall exerts on end C of rod ABC.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd