Determine what is the flow through the culvert

Assignment Help Civil Engineering
Reference no: EM13313934

An embankment is traversed by a 6ft by 6ft concrete box culvert 100ft long. The upstream invert is at an elevation of 8ft and the downstream invert 4 ft. If the depth at the upstream end of the culvert is 8 ft, what is the flow through the culvert? Assume the culvert is in inlet control.

Reference no: EM13313934

Questions Cloud

Determine the minimum horizontal force necessary for man : Determine the minimum horizontal force necessary for 200 lb man to scale crevice (using his feet and back). The coefficient of static friction between his shoes and his back against the wall is 0.4.
Calculate the pressure drop to process pregelatinized starch : A single screw extruder is being used to process pregelatinized starch. The screw dimensions are as follows: channel width 3 cm, channel height 0.5 cm and screw length 50 cm. The wall velocity is estimated to be 0.31 m/s.
Determine the moisture content of product leaving the dryer : The tunnel is supplied with 1500 kg dry air/h at 50°C and 10% RH, and the air leaves at 25°C in equilibrium with the product at 50% RH. Determine the moisture content of product leaving the dryer and the final water activity.
To prepare a project proposal on how to set up the start-up : To prepare a project proposal on how to set up the start-up
Determine what is the flow through the culvert : The upstream invert is at an elevation of 8ft and the downstream invert 4 ft. If the depth at the upstream end of the culvert is 8 ft, what is the flow through the culvert. Assume the culvert is in inlet control.
Determine the volume of the solid s by the parabola : Find the volume of the solid S. The base of S is the region enclosed by the parabola y=4-3x^(2) and the x-axis. Cross sections perpendicular to the y-axis are squares.
Financial statements and forecasts for convenience : Size-up HCM using historical ratio analysis and a discussion of its business risk and financial risk and the Q1 tab reproduces HCM's financial statements and forecasts for your convenience.
Explain photosynthesis of carbon dioxide : photosynthesis in plants generate sugars such as glucose (C6H12O6) and oxygen from carbon dioxide and water. how many kilograms of oxygen are produced from photosynthesis of 330 kg of carbon dioxide
What should be the length of an aluminum wire of 6 mm : What should be the length of an aluminum wire of 6 mm in diameter so it can be twisted one full turn without exceeding a shear stress of 42 MPa G = 27 GPa.

Reviews

Write a Review

Civil Engineering Questions & Answers

  What will be the force in newtons required

A lunar module weights 1500 kg on earth where g = 9.75 mps2. On the surface of the moon where g = 1.70 mps2, what will be the force in Newtons required to accelerate the module at 10 mps2?

  Determine the coefficient of thermal expansion

Determine the coefficient of thermal expansion (in m/m.K) for the material over the temperature ranges - Determine i. the phases present

  Determine the maximum shear stress for the shape

The shape below has a cut along the entire length of the member thus making it an open section. The uniform thickness is 0.125in. Determine the maximum shear stress for the shape. Compare the stress for this open shape to a shape without a cut.

  Compute the normal flow rate through the channel

A large drainage channel has a trapezoidal cross section with a bottom width of 75 feet and bank side slopes of 4:1 (H:V). If the normal depth of flow is 25 feet, compute the normal flow rate through the channel (Q in cfs).

  Estimate the time in days it would take the mtbe to travel

A tracer study was conducted to assess groundwater velocity and showed that a slug of a conservative tracer took 34 days to travel the 10-m distance between two wells.

  Determine the flow rate of water through the channel

The flow rate of water flowing in a 3m wide channel is to be measured with a sharp-crested triangular weir 0.5m above the channel bottom with a notch angle of 60°. If the flow depth upstream from the weir is 1.5m

  Rankine cycle and thermal efficiency

Determine the rate at which heat is added in the boiler, the power required to operate the pumps, the net power produced by the cycle, and the thermal efficiency.

  Determine the differential settlement

Determine the differential settlement between the centre line of the ring beam and under the centre of beam. The inner and outer radii of the ring beam are 8m and 12m respectively.

  Write assembly-language program that counts all even numbers

Write a HCS12 assembly-language program that counts all even numbers from a 10-variable, byte-sized array and moves the odd numbers to a new array.

  What is the ratio of the strain energy u1 in the tube

a thin walled circular tube and a solid circular bar of the same material are subjected to torsion. the tube and the bar have the same cross-sectional area and the same length.

  Determine total stress and pore water pressure of sand

a layer of clay, 5m thick, overlies a deposite of sand, 5m thick, which is underlaid by rock. the water table in the sand is sub-artesian with a level at 2m below fround level. the saturated unit weights of the clay and sand are 21 and 16 KN/m^3 r..

  Determine what is the maximum intensity

During a 60 minute storm the following amounts of rain fell during successive 15 minute intervals: 33mm, 23mm, 15mm, and 5mm. What is the maximum intensity

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd