Determine what is the change in length in inches

Assignment Help Civil Engineering
Reference no: EM13315586

The strain in member AB was measured to be 8.9*10-4. If the member is an L3*2 1/2* 1/4 of A36 steel determine the following:
a) What is the change in length in inches?
b) What is the force in the member?

Reference no: EM13315586

Questions Cloud

Determine the percentage increase in the discharge the ditch : As part of a drainage improvement project, a drainage ditch will be straightened and cleaned. As a result, the lenght of the ditch will decrease from 1800 ft to 1400 ft and the mannings roughness factor will be reduced to 0.018 from 0.022.
How many kilograms of sodium carbonate : Sodium carbonate (Na2CO3rm Na_2CO_3) is used to neutralize the sulfuric acid spill. How many kilograms of sodium carbonate must be added to neutralize 3.02×103kgkg of sulfuric acid solution
Ntt docomo company for communication : 1-NTT Docomo Company for Communication and company
Determine what concentration of ozone should be injected : A water supplier wants to inject ozone into a piper bringing water to the water treatment plant to predisinfect the influent. The 3.0-ft diameter piper is 3,400 feet long with a steady flow rate of 10,000 gal/min.
Determine what is the change in length in inches : The strain in member AB was measured to be 8.9*10-4. If the member is an L3*2 1/2* 1/4 of A36 steel determine the following: a) What is the change in length in inches b) What is the force in the member
Islam and muslim are from the same aramaic-semetic root : The words Islam and Muslim are from the same Aramaic/Semetic root, and the words Sal?m, Shalom, and Salem are all translated as “ peace,” “peace that comes from submission to God,” “whole,” “ complete,” “intact.” Explain why “submission” is the major..
To what precision must know the value of a radian : To what precision (how many decimal places) must you know the value of a decimal degree in order to reliably convert it to the nearest second (1/3600 of a degree) To what precision (how many decimal places) must you know the value of a radian
Develop a mission statement : Are there some ethical values or principles that you believe are relative to one's own culture, religion, or personal opinion?  Are there some that you believe are not?  What makes them different?
Determine wet unit weight and dry unit weight-wet density : Given the following data for an undisturbed soil sample: Gs = 2.69, e = 0.65, water content = 10% Determine wet unit weight and dry unit weight, wet and dry density

Reviews

Write a Review

Civil Engineering Questions & Answers

  Identify the risk factors

Conduct either a qualitative or quantitative risk assessment on this project. Identify the risk factors that you consider most important for the suspension bridge construction. How would you assess the riskiness of the project? Why?

  Determine mechanical properties of ametal by concucting test

if you were asked to determine the mechanical properties of ametal by concucting a test, what type of test whould you use, and what data can you abtain from that test

  Calculate the percentage change in volume based on volume

The natural water content of a saturated soil is 41% and its shrinkage limit = 20%. Gs (sp. gravity of solids) = 2.75. Calculate the percentage change in volume based on its volume at its natural water content if the soil is dried to a water conte..

  Estimate the constant rate of withdrawal from reservoir

Estimate the constant rate of withdrawal (in m^3/s) from a 1375 ha reservoir in a month of 30 days during which the reservoir level dropped by 0.75 m in spite of an average inflow into the reservoir of 0.5 Mm^3/day.

  Estimate the hourly so2 and particle emissions

what type of SO2 removal device before (in front of) or after (following) the particle collector would you use?

  Determine when the crates begin to slide at an angle

Crates A and B weigh 300 lb and 110 lb, respectively. They are connected together with a cable and placed on the inclined plane. If the angle θ is gradually increased, determine when the crates begin to slide.

  Find the magnitude and direction of the friction force

Determine whether the block shown is in equilibrium and find the magnitude and direction of the friction force when theta=30 and P=150N

  Determine the required dimensions of a hollow steel shaft

Determine the required dimensions. The inside diameter is to be two- thirds of the outside diameter. The allowable shearing stress is 70 MPa, and the angle of twist is not to exceed 4 degree in 3 m of the shaft.

  Calculate the size of an anaerobic digester required

Calculate the size of an anaerobic digester required to treat the sludge from a primary clarifier designed to treat 38,000 m3/d of sewage. The quantity of dry volatile solids removed by the plant is 0.15 kg dry solids/m3 sewage.

  Determine the magnitude of reaction

Determine the magnitude of reaction at point A (in kips) of a 20' beam with 5kips at 4' of the beam and 2kips at 9' of the beam at 350lbs./ft.

  Find e for tendon to be concordant

Find e1, e2, e3 for tendon to be concordant - find deflection at those location

  Determine the concentration of the sodium ion in solution

A mass of .525g of NaCl has been added to a cylinder containing water. The cylinder diameter is 1.5in and depth of water in 5inches. Determine the concentration of the sodium ion in solution, showing your ans in units of a) mg/L b) mass % and c) m..

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd