Determine what is angular error if the distance to the pole

Assignment Help Civil Engineering
Reference no: EM13299488

A 6-ft range pole is set over a station on which a sight is to be made with a the odolite. If the sight is made to the center of the rod 4-ft up from the ground, and the center of the top of the pole is out of plumb 0.12 feet in a direction normal to the line of sight, what angular error is produced in a 200.00-ft sight (to the nearest second)? What is the angular error if the distance to the pole is 40.00-ft?

Reference no: EM13299488

Questions Cloud

Find tensile stress that will give probability of failure : The median value of the rupture strength was 300 MPa. The ceramic is to be used for components with dimensions l=50mm, b=d=5mm loaded in simple tension along their length. Calculate the tensile stress that will give a probability of failure of the..
What wavelength is minimally reflected for normal incidence : A coating is applied to a lens to minimize reflections. what wavelength is minimally reflected for normal incidence in the lowest order
Explain calculate the cell potential for the reaction : Calculate the cell potential for the following reaction as written at 61 °C, given that [Cr2 ] = 0.826 M and [Ni2 ] = 0.0200 M. Cr(s) + Ni ^2+ (aq) --> Cr^2+ (aq) + Ni(s)
What is the monthly payment on charlene loan : Charlene just bought her dream car, a 2011 Porsche Carrera GTS Cabriolet that cost $125,000. She paid $20,000 down and financed the balance over 72 months at 6.5% p.a. (Assume that Charlene makes all required payments are made on time).
Determine what is angular error if the distance to the pole : A 6-ft range pole is set over a station on which a sight is to be made with a the odolite. If the sight is made to the center of the rod 4-ft up from the ground, and the center of the top of the pole is out of plumb 0.12 feet in a direction normal..
Compute the standard potential for this cell at 25 °c : A galvanic (voltaic) cell consists of an electrode composed of nickel in a 1.0 M nickel(II) ion solution and another electrode composed of copper in a 1.0 M copper(I) ion solution, connected by a salt bridge. Calculate the standard potential for t..
What is the wavelength of argon laser light : A Young's double-slit interference experiment is performed with blue-green argon laser light. The separation between the slits is 0.525 mm, What is the wavelength of argon laser light
What has caused the ranking conflict : A. What is each projects payback period? B. What is each projects net present value? C.What is each projects internal rate of return? D. What has caused the ranking conflict? E. Which project should be accepted and why?
Define the best to buffer an aqueous solution at a ph : Which of the following combinations would be the best to buffer an aqueous solution at a pH of 5.0? H3PO4 and H2PO4- (Ka=7.5e-3) HNO2 and NO2 (Ka=(4.5e-4) CH3CO2H and CH3COO (Ka= 1.8e-5) H2PO4 and HPO4 (Ka=6.2e-8)

Reviews

Write a Review

Civil Engineering Questions & Answers

  What is the amplitude of the vertical vibration

if the enginer is mounted floatiing on very weak spring, what is the amplitude of the vertical vibration of the engine? (b) if the engine is mounted solidly on a rigid foundation, what is the alternating force amplitude transmitted? Assume the con..

  What is the magnitude of shaft work obtained

If the amount of heat transfer in the HE unit is 2460 kJ per kg of steam, what is the magnitude of shaft work obtained from the turbine in kW?

  Use work and energy to find paul speed

Susan's 12.0 baby brother Paul sits on a mat. Susan pulls the mat across the floor using a rope that is angled 30 degrees above the floor. The tension is a constant 31.0 and the coefficient of friction is 0.210. Use work and energy to find Paul's ..

  How many balloons would it take

To float a 160 pound man using helium balloons (assume 0.52 cubic feet per inflated balloon). How many balloons would it take? Assume density of air is 1.29 kg/cubic meter and the density of helium is 0.179 kg/cubic meter.

  Annual power cost of the ro system

Is the system within membrane manufacturer's warranty requirement of maximum flux rate of 14 gfd? What is the annual power cost of the RO system?

  Determine the velocity and acceleration of point c of belt

determine the velocity and acceleration of point C of the belt, (a) immediately before the power is turned off. (b) 9 s later.

  What is the runoff rate into the inlet grate

If the detention storage on the paved section is increasing at the rate of 60 m3/hr, what is the runoff rate into the inlet grate?

  Estimate value of emission rate divided by the wind speed

A ground level source is emitting pollution. An air sampler is located 1 km downwind and 0.5km crosswind of the source measures the concentration of the pollutant ant ground level as 10 micrograms/cubic meter.

  Explain lift charts in direct marketing

Lift Charts in direct marketing, The mass-mailing business is often used to illustrate the use of lift charts. Another real world application where the lift charts can be used

  How to formulate a set of constraints that will enforce

Given the binary variables x1,x2,x3,x4 and x5, formulate a set of constraints that will enforce x3,x4, and x5 to equal one if x1=1 and x2=0.

  What is the mass of the fish

A fish hanging from the bottom of the spring oscillates vertically at a frequency of 2.00 Hz. Ignoring the mass of the spring, what is the mass of the fish?

  Writing case study about bridge collapse

Writing case study about bridge collapse

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd