Determine what capacitance value is needed

Assignment Help Electrical Engineering
Reference no: EM13262063

A 120volt, 60Hz single phase load of 3.2KW with an inductive power factor of 8.1 needs to be corrected to a power factor of 0.95 (inductive).
What capacitance value (in uF) is needed?

Reference no: EM13262063

Questions Cloud

Find values of the four resistors and the power dissipated : A 120V source is connected in parallel with four (4) resistors, all of which are in parallel. The resistors have the ratios 1 : 2 : 3 : 6 (for example 4Ω, 8Ω, 12Ω, 24Ω). The source delivers 288W to the parallel combination.
Explain magnesium may be formed by the passage : How many grams of magnesium may be formed by the passage of 76.0 amps for 8.03 hours through an electrolytic cell that contains a molten magnesium salt.
Design a multi-function unit with four functions chosen : Design a multi-function unit with 4 functions chosen using select inputs s1s0. The unit has two 2-bit inputs (A = a1,a0 and B = b1,b0) and 4-bit output (z3,z2,z1,z0). The unit performs A+B (s1s0 = 00), AB (s1s0 = 01), A2+B (s1s0 = 10)
Explain electrolysis of molten nacl in a downs cell : Electrolysis of molten NaCl in a Downs cell is the major isolation step in the production of sodium metal. If 65.0 g of Na are obtained, how many amps are required to produce this in 7.50 hours
Determine what capacitance value is needed : A 120volt, 60Hz single phase load of 3.2KW with an inductive power factor of 8.1 needs to be corrected to a power factor of 0.95 (inductive). What capacitance value (in uF) is needed
How much will the total income available to stockholders : Assume that Western Exploration Corp. is considering the acquisition of Ogden Drilling Company. The latter has a $510,000 tax loss carryforward. Projected earnings for the Western Exploration Corp. are as follows.
Explain how do the isoelectric points in part b compare : How do the isoelectric points in Part B compare with isoionic points from Part A? Explain similarities or differences that you observe in these values.
How old is she when she arrives at the star : An astronaut travels at a speed of 0.93c from the Earth to a distant star that is 4.5e+17 m away. how old is she when she arrives at the star
Calculate how much work must the thrusters do : A 4000 kg lunar lander is in orbit 50 km above the surface of the moon. How much work must the thrusters do

Reviews

Write a Review

Electrical Engineering Questions & Answers

  Determine an infinite planar sheet of charge

An infinite planar sheet of charge, with surface charge density rho_s = 3 µC/m^2, is positioned in the x-y plane. Find the E and D fields above and below the plane, assuming that the relative permittivity of the medium

  Use the magnetization curve

Determine the battery voltage required to obtain a flux density of 1.2 T in the air gap. Use the magnetization curve.

  How can we increase the data rate in a digital signal

1. What is the effect of increasing the quantization levels on the quantization error in a PCM signal 2. How can we increase the data rate in a digital signal

  Find the electric field for all values of z

An electric field E = 10z(hat) V/m exists in air (for which epsilon_r = 1) in the region defined by the equation z > 0. A dielectric medium with epsilon_r = 5 exists in the region defined by the equation z

  Compute the mutual inductance between the input and output

The electric motors unmanned drones use transformers to produce sufficient current to move the flight surfaces. Due to the weight restrictions of the vehicle, the transformers use a ceramic rather than iron, the ceramic has a permeability of mu = 4..

  Determine the weigh of the rod in units of pounds-force

A rod on the surface of Jupiter's moon Callisto has a volume of 0.3 cubic meters. Determine the weigh of the rod in units of pounds-force. The specific gravity is 4.7 gravitational acceleration on Callisto is 1.25 meters per second squared.

  Calculate the grades after they have been curved

An instructor in Engineering Department has the following grading policy: "Curving of grades is achieved by adding to every grade the difference between 99 and the highest grade in the class"

  For visible light in water what is the range of wavelengths

Visible light has wavelengths from 400 to 700 nm in a vacuum. a. What is the range of frequencies b. For visible light in water, what is the range of wavelengths

  Explain how the electrons and holes move through the device

trace how the electrons and holes move through the device under the two different biasing conditions. Explain how these three devices work in terms of holes and electrons.

  What is the spring constant for the suspension system of car

1. A potentiometer with a total range of 350° is supplied with a voltage of 12 Vdc. Find the output voltage for an angle of 135°. 2. An absolute optical rotary encoder has five tracks. How many bits is the output.

  Give difference between vin n vo in voltage clipping circuit

1) What is the difference between Vin and Vo in a voltage clipping circuit with a zener diode 2) Does Vzo of a zener depend on the temperature of the surrpunding  3) Why is it necessary to put a resistor in a voltage regulator cirucit with a zener di..

  What is the system reliability of a system comprised

The reliability performance of each microprocessor is based on the exponential reliability distribution with the following failure rates: A = 23.5 × 10^-3 , B = 12.5 × 10^-4 , C = 12.5 × 10^-4 and D = 23.5 × 10^-3

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd