Determine what are the horizontal distances with an edm

Assignment Help Civil Engineering

Reference no: EM13326401

The slope distances shown were measured with an EDM while the differences in elevation between the ends of each line were determined by leveling. What are the horizontal distances?

Slope Distance(ft)
a. 1310.81
b. 792.22
c. 656.72

Elevation Difference
a. -36.96
b. -17.03
c. 13.44

Reference no: EM13326401

Questions Cloud

What is the value of the new resistance in ohms : A cylindrical conductor has resistance of R0 = 200 ? (ohms). what's the value of the new resistance in ohms

What is water discharge in system of incipient cavitation : In a venturi meter the gage pressure is 120 kPa whencavitation just starts to occur. If the Diameter is 40 cm and theneck diameter is 14 cm, what is the water discharge in the system for this condition of incipient cavitation

Calculate the force on the baby due to jupiter : Calculate the force on the baby due to Jupiter if it is at its closest to the Earth, some 6.29x1011 m away, showing it to be comparable to that of the father

Determine what is demand for time if left turns are provided : Given the following geometry of an intersection: Four lanes fornorth and southbound traffic; two lanes for east and west boundtraffic. The peak hour volume for: northbound traffic is 1400vehicles with 10% left and right turns,

Determine what are the horizontal distances with an edm : The slope distances shown were measured with an EDM while the differences in elevation between the ends of each line were determined by leveling. What are the horizontal distances

Estimate the magnitude of the net force : A 3.00-kg mass undergoes an acceleration given by a = (2i+5j ) m/s2. The magnitude of the net force is

Estimate theoretical fracture strength of a brittle material : Estimate the theoretical fracture strength of a brittle material ifit is known that fracture occurs by the propagation of anelliptically shaped surface crack of length 0.2 mm(0.007874 in)

Determine what is the magnitude of the maximum stress : What is the magnitude of the maximum stress that exists at the tip of an internal crack having a radius of curvature of 5.5× 10-4 mm (2.165 ×10-5 in.) and a crack length of 3.5 ×10-2 mm (1.378 × 10-3in.)

Determine what is the oil flowrate in stb per day : Two wells had been drilled on 40-acre spacing. Well 1 is injectionand Well 2 is producing well. Down hole injection pressure is 8500psi, and bottom hole pressure in producing well is 2400 psi.

User Account

All Pages