Determine void ratio and unit dry weight of soil particles

Assignment Help Civil Engineering
Reference no: EM13310683

A 110 cm^3 sample of wet soil has a mass of 106 g and a degree saturation of 100%. When oven-dried, the mass is 81 g. Determine the 1) water content, 2) specific gravity, 3) void ratio, and unit dry weight of soil particles.

Reference no: EM13310683

Questions Cloud

The theory of comparative advantage : 1.Does intra-firm trade contradict the theory of comparative advantage? Why or why not?
Determine the safe load the column can carry using method : A column of dimensions 200 X 300 mm has an effective length of 3m. It is reinforced with 6 HYSD bars of 20mm diameter. Determine the safe load the column can carry using working method of design. Using M20 Concrete.
How long does it take the projectile to hit the ground : a projectile of mass 0.212kg is shot from a cannon. The end of the cannon barrel is at height 6.4m, the initial velocity of the projectile is 9.3m/s. How long does it take the projectile to hit the ground
Determine what is the effective stress 25 feet deep : What is the effective stress 25 feet deep if the specific weight of the dry soil (dry unit weight) is 120 pcf and the water table is 12 feet deep
Determine void ratio and unit dry weight of soil particles : A 110 cm^3 sample of wet soil has a mass of 106 g and a degree saturation of 100%. When oven-dried, the mass is 81 g. Determine the 1) water content, 2) specific gravity, 3) void ratio, and unit dry weight of soil particles.
Determine the rest mass of the polonium nucleus : A polonium nucleus, while at rest, decays into a lead nucleus of rest mass 342.1126 x 10^-27 kg, and emits a helium nucleus of rest mass 6.6483 x 10^-27 kg. Determine the rest mass of the Polonium nucleus
What is the concentration of the chemical leaving pfr : We have a batch reactor ( r = -k1) with volume of V1. The concentration entering the batch reactor is Co. The batch reactor is operated from t =0 to t = t1. After that the water exits the batch reactor and enters a PFR (r = -k2C) wi..
Calculate the time interval between air photo exposures : Air photos are taken with specified overlap to take advantage of image parallax. Calculate the time interval between air photo exposures if the ground speed of the aircraft is 160km/h, the focal lenght is 50mm
Explain which are hybrid orbital the carbon at the molecules : which are hybrid orbital the carbon at the following molecules a, H3C-CH3 b, H3C-CH= CH2 c, CH3-C Tripl bond C-CH2OH d, CH3CH=O

Reviews

Write a Review

Civil Engineering Questions & Answers

  Determine the average value of k in meter per sec

A stopwatch was started when h was 501 mm and read 17.6 seconds when h was 244 mm; the test was repeated for a drop from 254 mm to 97 mm and the time was 22.4 seconds.

  Find the required minimum area for the heat transfer

Assume that the wall separating the steam and seawater is 4 mm of steel, with con- ductivity of 15 W/m K, and that a maximum 5oC difference between the two fluids is allowed in the design.

  How long is the irrigation boom from the center pivot

1.How long is the irrigation boom (in feet) from the center pivot to its farthest extent. 2.If the irrigation boom makes 4 full revolutions in a day, how many miles does the end of the boom travel in 4 days.

  Absolute pressure of the carbon dioxide in the can

The circular top of a can has a radius of .0320m. the pull-tab has an area of 3.8x10^-4 m^2. The absolute pressure of the carbon dioxide in the can is 1.40x10^5Pa. find the force that these gas generates on the top of a can?

  Determine depth that will result upstream during flood event

A 1.5 m diameter culver (concrete barrel, well - rounded entrance) that is 20m long is installed on a slope of 2 percent. The design discharge is 9.5 m^3/sec and the inlet will be submerged but not the outlet.

  Dry unit weight of material

A soil borrow material in its natural state in the ground has a unit weight of 118pcf. Its natural water content is 7%. What is the dry unit weight of this material?

  What percentage of removal should be expected for particles

Assume the settling tank behaves like an ideal sedimentation tank, what percentage of removal should be expected for particles with a settling velocity of 0.002 m/sec

  Determine does there appear to be any trend in the data

The US EPA has published the following data for the release to the Florida environment of sulfuric acid (H2SO4 ), the most widely used industrial chemical (in millions of pounds).

  Determine heat removed in the cooling process in kj per min

atmospheric air at 1.01 bar 30 c and 60 percent relative humidity flows over a set of cooling coils at an inlet flow rate of 1500 m^3/min the liquid which condeness is removed from the system at 17 c

  Determining maximum acceleration and maximum velocity

The posItIon of a particle along a straight line is given by s = (t 3 - 9t 2 + 1St) ft, where t is in seconds. Determine its maximum acceleration and maximum velocity during the time interval 0 :5: t :5: 10 s.

  Determine the angle of internal friction for the soil

A cohesionless soil sample was subjected to a triaxial test. The sample failed when the minor principal stress (confining pressure) was 1200 lb/ft^2 and the deviator stress was 3000 lb/ft^2.

  Determine the mass and specific volume of argon gas

Determine the mass and specific volume of argon gas in a vessel at 150 kPa and 20°C. The vessel is spherical, with radius 5 m.^5

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd