Determine time when current first reaches a value 30a

Assignment Help Electrical Engineering
Reference no: EM13278221

A 50 cycle ac has a maximum instantaneous value of 42.42A.It crosses the zero axis in a positive direction when time is zero. Determine a)time when current first reaches a value 30a

b) time when current after a ahving gone through its maximum positive values reaches a value of 36.7 amp

c)value of the current when the time is 1/20 sec

d) value when current first reaches a negative value of 21.21amp.

Reference no: EM13278221

Questions Cloud

What is the inductance of the load connected in parallel : 500W lighting is connected in parallel with an inductive load. A clamp-on ammeter reveals a total circuit current of 7A. What is the inductance of the load connected in parallel with incandesent lights. Assume a voltage of 120v and 60hz.
State the equilibrium position of adding a suitable catalyst : Consider the reaction H2(g) + Br2(g) 2 HBr(g), which is exothermic as written. What would be the effect on the equilibrium position of adding a suitable catalyst
Find the impulse on the arrow : a 27.2 g arrow is fired with a velocity of 87.3 m/s from a bow with a mass of 2.45 kg. Find the impulse on the arrow
Determine the tire pressure : An automobile tire is inflated with air originally at 10.0°C and normal atmospheric pressure. What is the tire pressure
Determine time when current first reaches a value 30a : A 50 cycle ac has a maximum instantaneous value of 42.42A.It crosses the zero axis in a positive direction when time is zero. Determine a)time when current first reaches a value 30a
Explain p-aminobenzoic acid and ethyl p-aminobenzoate : Can I be provided with the pictures of a labeled HNMR for each of these compounds? A) p-toluidine B) N-acetyl-p-toluidine C) p-acetamidobenzoic acid D) p-aminobenzoic acid E) ethyl p-aminobenzoate
With what speed does the ball leave the club : A golf club strikes a 0.044-kg golf ball in order to launch it from the tee. For simplicity, With what speed does the ball leave the club
Evaluate the line integral of h about the rectangular path : (a) Evaluate the line integral of H about the rectangular path P1(2,3,4) to P2(4,3,4) to P3(4,3,1) to P4(2,3,1) to P1 given H = 3z ax - 2x3 az A/m. (b) Determine the quotient of the closed line integral and the area enclosed by the path as an appro..
What is the wavelength of the light from the second source : In a diffraction grating experiment, light of 600 nm wavelength produces a first-ordered maximum 0.35 mm from the central maximum on a distant screen. What is the wavelength of the light from the second source

Reviews

Write a Review

Electrical Engineering Questions & Answers

  Find the transformation ratio of a transformer

Find the transformation ratio of a transformer having 350 turns on the secondary winding and 7000 turns on the primary. What voltage must be applied to the primary of the transformer to develop an open-circuit secondary voltage

  Find the average signal y using the integral

Let x(t) = u(t)  u(t  1).Find the average signal y(t) using the above integral. Let T = 1. Carefully plot y(t).Verify your result by graphically computing the convolution of x(t) and the impulse response h(t) of the averager.

  What is the minimum of bits in its instruction codeword

What is the minimum of bits in its instruction codeword How would your answer change if you also knew that 30% of the possible permutations of instruction word bits are not used

  Basic neutralizer control system

Write a short report that analyses the P&ID - Basic Neutralizer Control System: The neutralizer process may be used to adjust the pH of a feed stream.

  Determine amplitude of the output for each of input signal

The input signal (inflow minus outflow) to an integral process varies sinusoidally at a radian frequency, omega i. of 0.025 rad/s. The output signal varies sinusoidally at the same frequency with an amplitude of 10%.

  Find the transfer function and difference equation

A second-order bandstop filter is required to satisfy the following specifications: fs= 8,000 Hz f0= 60 Hz bandwidth= 40 Hz Find the transfer function and difference equation by the pole- zero placement method.

  At what frequency will the phase angle be 45 degrees

A series RLC circuit has a resonant frequency of 40 kHz and the Q is 20. At what frequency will the phase angle be 45 degrees

  Which would have prevented the unfortunate breakdown

the Mars Rover Spirit got stuck in the Martian sand. The wheels kept slipping. Attempts to free it were futile. Discuss the type of actuator in this case. Can you suggest any improvements in the actuator that would have prevented this unfortunate ..

  Find the output voltage produced

A 6-bit DAC has an input 1001012 and uses a 10.0-V reference.

  What is the linear attenuation coefficient for the material

A material is found to have a tenth-thickness of 2.3 cm for 1.25-MeV gamma rays. (a) What is the linear attenuation coefficient for this material (b) What is the half-thickness (c) What is the mean-free-path length for 1.25 MeV photons in this materi..

  What is magnitude of the radiative electric field observed

At time t = 0 an electron at the origin is subjected to a force that briefly accelerates it in the +z direction, with an acceleration of 6 × 1017 m/s^2. Before trying to answer the following questions, draw a clear diagram. Location D is 28, 0, 0 ..

  What is the mode integer m of the peak radiation

Consider an AlGaAs based heterostructure laser diode which has an optical cavity of length 200 microns. The peak radiation is at 870 nm and the refractive index of GaAs is about 3.7.  What is the mode integer m of the peak radiation

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd