Determine the wavelength of the resulting wave on the cable

Assignment Help Physics

Reference no: EM13313706

A steel cable with a total length of 25.6 m and total mass of 95 kg is connected to two poles. The tension in the cable is 864 N and the wind makes the cable vibrate at a frequency of 6.9 Hz. Calculate the wavelength of the resulting wave on the cable.

Reference no: EM13313706

Questions Cloud

Determine the filtration rate at the depth of the layer : The absolute viscosity and density of water are 1.4X10^-3 Pa-s and 998 kg/m^3, respectively. For a head loss of 0.1 m, determine the filtration rate (m/d) if the depth of this layer of sane is 0.1m

Determine how far away are the cliffs : You are on a boat in a fog and know there are cliffs ahead of you somewhere, but you cannot see them. How far away are the cliffs

Explain what is the final temperature of substances : A 31.3g wafer of pure gold initially at 69.3^\circ C is submerged into 64.1g of water at 27.7^\circ C in an insulated container. What is the final temperature of both substances at thermal equilibrium

Determine the size and power requirements for rapid mix : A water treatment plant is processing water at s flow rate of 0.26m^3/s. The hydraulic detention times for the rapid mix tank, flocculation basin and the rectangular sedimentation basin are 10 sec, 30 min, 60 min, respectively.

Determine the wavelength of the resulting wave on the cable : A steel cable with a total length of 25.6 m and total mass of 95 kg is connected to two poles. Calculate the wavelength of the resulting wave on the cable

Determine number of kilograms of chlorine needed per day : Consider again the proposed water treatment plant for a city of 100,000 people where the maximum daily water usage rate is 99 X 106 L/d. Determine (a) the number of kilograms of chlorine needed per day and (b) the capacity of the contact tank.

Explain the energy of a photon of electromagnetic radiation : Calculate the energy of a photon of electromagnetic radiation at the following frequency 103.7 (typical frequency for FM radio broadcasting) in J.

Explain how to determine the max height of a brick wall : Assuming a density of 120/ft^3 for masonry brick work, determine the max height of a brick wall if the allowable compressive stress is limited to 150/in^2 and the brick is a) 4" wide b) 6" wide.

What is the minimum detention time in hours to settle out : The settling velocity of alum floc in a sedimentation basin is approximately 0.0014 fps. Calculate the equivalent overflow rate in gpd/ft2. What is the minimum detention time in hours to settle out the alum floc in an ideal basin with a depth of 1..

User Account

All Pages