Determine the waters speed in the wider pipe

Reference no: EM13317895

Water flowing in a horizontal pipe is at a pressure of 1.55 105 Pa at a point where its cross-sectional area is 6.00 m2. When the pipe narrows to 0.400 m2, the pressure drops to 1.16 105 Pa. Find the water's speed in the wider pipe.

Reference no: EM13317895

Questions Cloud

Find the total active earth pressure against the wall : The backfill soil's unit weight and angle of internal friction are 17.2 kN/cubic meter and 31 degrees respectively and the angle of wall friction friction between backfill and wall is 20 degrees. Find the total active earth pressure against the wa..

Find the change in elevation of points a-b and c : A 1.0-m rigid horizontal support is hung by two cables. One cable is brass and The other cable is high-density polyethylene plastic. At room temperature (21°C), the cables measure 3.50 m vertically.

What is the maximum charge that can be stored in capacitor : A parallel-plate capacitor is made from two aluminum-foil sheets, each 3.00 cm wide and 10.0 m long. What is the maximum charge that can be stored in this capacitor

Determine point of application from the base of wall : he top of the soil is level with the top of the wall, and the soil carries a uniformly distributed load of 500 psf. Calculate the total active earth force of the wall per linear foot and determine its point of application

Determine the waters speed in the wider pipe : Water flowing in a horizontal pipe is at a pressure of 1.55 105 Pa at a point where its cross-sectional area is 6.00 m2. Find the water's speed in the wider pipe

Estimate cross sectional dimension of bar under strain : A 1000 in diameter solid steel (p= 0.303) bar is 10.0 ft long. Under a tensile load. (a) Estimate the lateral strain experienced by the bar (b) Estimate the cross sectional dimension of the bar when under strain

Estimate the net outward force on a passengers eardrum : An airplane takes off at sea level and climbs to a height of 480 m. Estimate the net outward force on a passenger's eardrum assuming the density of air is approximately constant

What is the first order decay coefficient in day-1 : A tank operated as a CFSTR used to remove benzene from a flow stream is 1500 m3 in size. The flow rate in and out of the tank is 8 m3/day. If the influent benzene concentration of 265 ug/L and the effluent concentration is 12 ug/L

Prepare the cad drawings : Need to prepare the CAD drawings

User Account

All Pages